This patch force processing of permission, attribute and group
attributes in lower case, to match behavior of IPA CLI, transforming
all of them into lowercase characters.
The new behavior fixes idempotence issues when mixing different
capitalization in different tasks for the same attribute.
A new test playbook is avaiable at:
tests/delegation/test_delegation_member_case_insensitive.yml
Some attributes for ipagroup objects are stored using lower case letters
and should be converted upon retrieving parameter data.
This patch adds the missing conversion and provides a new test playbook:
tests/group/test_group_case_insensitive.yml
ipahostgroup parameters 'host', 'hostgroup', 'membermanager_user' and
'membermanager_group' must be compared in a case insensitive manner
and stored as lower case strings.
This patch fixes the comparison and storage of this parameters, and
change the handling of members to use the same structure as in newer
modules.
Two new tests files were added:
tests/hostgroup/test_hostgroup_case_insensitive.yml
tests/hostgroup/test_hostgroup_membermanager_case_insensitive.yml
The config tests are currently setting the pac type to empty or without
MS-PAC type. This results in failed authorization for IPA API.
An issue has been opened for FreeIPA to address this:
https://pagure.io/freeipa/issue/9527
As FreeIPA now requires MS-PAC to be set in ipaKrbAuthzData to trigger
PAC generation, there's a timing issue that causes API malfunction which
is long enough to cause the client part insallation to fail.
By restarting KDC after DS password is set, we force cached values to be
refreshed, allowing the API to work correctly.
Resolves: https://github.com/freeipa/ansible-freeipa/issues/1200
This is "Fix ipa-client-automount install/uninstall with new install
states" https://github.com/freeipa/freeipa/pull/7100 for ansible-freeipa:
Issue 8384 introduced a new installation state for the statestore
to identify when client/server installation is completely finished
rather than relying on has_files().
The problem is that ipa-client-automount may be called during
ipa-client-install and since installation is not complete at that
point the automount install was failing with "IPA client not
configured".
Add a new state, 'automount', to designate that automount installation
is in process. If check_client_configuration() fails it checks to
see if [installation] automount is True. If so it continues with the
installation.
This also addresses an issue where the filestore and statestore are
shared between the client and automount installers but the client
wasn't refreshing state after automount completed. This resulted in
an incomplete state and index file of backed-up files which caused
files to not be restored on uninstall and the state file to be
orphaned.
Fixes: https://pagure.io/freeipa/issue/9487
FreeIPA provides a default hbacsvcgroup named "Sudo", with capital 'S',
that is different from every other hbacsvcgroup, which are all
represented by lower case letters.
As data from IPA API was not modified, this causes an idempotence error
when using different capitalization with the 'hbacsvcgroup' parameter.
This patch fixes the issue by using the CaseInsensitive comparator to
create the hbacsvcgroup list.
Tests were update to make sure a regression is not included in the
future.
This is "ipa-client-install: enable SELinux for SSSD"
https://github.com/freeipa/freeipa/pull/6978 for ansible-freeipa:
For passkeys (FIDO2) support, SSSD uses libfido2 library which needs
access to USB devices. Add SELinux booleans handling to ipa-client-install
so that correct SELinux booleans can be enabled and disabled during
install and uninstall. Ignore and record a warning when SELinux policy
does not support the boolean.
Fixes: https://pagure.io/freeipa/issue/9434
On IPA CLI sudorule-add/del-runasuser accept 'group' as a parameter,
and this option was missing in ansible-freeipa ipasudorule module.
This patch adds a new parameter 'runasuser_group' to allow setting
Groups of RunAs Users, as allowed by CLI and WebUI.
New example playboks can be found at:
playbooks/sudorule/ensure-sudorule-runasusesr-group-is-absent.yml
playbooks/sudorule/ensure-sudorule-runasusesr-group-is-present.yml
FreeIPA suports renaming groupobjects with the CLI parameter "rename",
and this parameter was missing in ansible-freeipa ipagroup module.
This patch adds support for a new state 'renamed' and the 'rename'
parameter.
Tests were updated to cope with the changes.
- Replace outdated noqa 503 with noqa no-handler
- Drop outdated and not needed noqa 505 for include_vars
- Drop outdated noqa deprecated-command-syntax for
ansible.builtin.shell using cmd tag
These warnings have been reported by utils/lint_check.sh using
ansible-lint 6.22.1.
FreeIPA suports renaming user objects with the CLI parameter "rename",
and this parameter was missing in ansible-freeipa ipauser module.
This patch adds support for a new state 'renamed' and the 'rename'
parameter.
Tests were updated to cope with the changes.
Related to RHBZ#2234379, RHBZ#2234380
Fixes#1103
IPA DNS Zones management can be delegated by adding a "Manage DNS zone"
permission. The CLI commands that manage these permissions are
dnszone-add-permission and dnszone-remove-permission.
The ansible-freeipa module ipadnszone did not have this capability, and
it now support dnszone per-zone management delegation by setting the
module parameter 'permission'. If set to 'true' the permission will be
assigned to the zone, if set to false the permission will be removed.
Some parameters, in modules, have a specific data type, but allow the
use of an empty string to clear the parameter.
By providing a method to retrieve the parameter with the correct data
type, or optionally an empty string, allows for consistency of parameter
handling between different modules.
The parameter 'allow_empty_string' in 'module_params_get' is used to
allow an item in a list to be an empty string. The problem is that the
naming is misleading, as it is checking a list item rather than a
string.
This patch rename the parameter to 'allow_empty_list_item' so that it
more clearly refers to list itens instead of standalone strings, and do
not collide with future parameters that may test for empty strings which
are not part of lists.
After the change for a single job to run PR tests, and if there is any
change to ansible_module_utils, all the playbook tests are executed,
and the result is a failure due to timeout.
This PR increases the timeout so that a PR with changes to
ansible_module_utils can have the tests executed.
By the first quarter of 2024, all collections must pass ansible-lint
tests run with version 6.22.x. This PR ensure that all ansible-freeipa
tests depending on ansible-lint use a valid version of it.
When deploying an IPA client with ipaclient, if an error occured while
getting an OTP, no error message is logged, as the task that logs the
error is not excuted due to the previous taks failure.
By adding a 'rescue' section to the code block and moving the error
reporting to this new section, we ensure that the proper error messages
will be reported.
With ansible-core 2.14.12 using jinja2 templating in conditional
statements with ansible_facts['fqdn'] is marked as unsafe and results in
a failure.
The issues with using jinja2 templating in conditional statements for
asserts have been solved and a new server_fqdn fact has been added for
ansible_facts['fqdn'].
The uri parameters auth_uri, dev_auth_uri, token_uri, userinfo_uri and
keys_uri have not been validated before. Also the base_url was not
normalized. The auth_uri, dev_auth_uri, token_uri and userinfo_uri need
to be set for new entries, but might be empty or empty string for reset
or updates.
The ipaidpclientsecret needs to be decoded from binary string in
find_idp result to not trigger no change ipd_mod calls.
The code for validate_uri and base_url normalization has been copied
from the ipaserver idp plugin.
ansible_freeipa_module:
urlparse from urllib.parse with a fallback to six.moves.urllib.parse is
imported and also exported. urlparse is needed for validate_uri in ipaidp
module.
Resolves: RHEL-17954, RHEL-17955, RHEL-17957 and RHEL-17958
