8 Commits
Author SHA1 Message Date
Don NaroandGitHub b7e1ed5661 fix: add default to k8s_copy init-pod until conditional (#1233) 2026-09-22 09:01:39 -04:00
8a9dd54fe7 k8s_cp - wait for remote tar to finish before closing the stream (#1217)
* fix(k8s_cp): wait for remote tar to finish before closing the stream

The module closed the exec connection right after writing the last chunk,
killing tar mid-extract, and never checked its exit status, so a partial
or failed copy was reported as success (#776).

The v4 exec protocol cannot half-close stdin, and busybox tar blocks for
EOF rather than stopping at the end-of-archive marker, so bound the stream
with `head -c N | tar ...`. tar then gets a clean EOF, exits on its own,
and its status is read from the error channel. Containers without /bin/sh
and head keep the previous behaviour and get a warning.

Also add copy_timeout (default 300s, #621) and stream the archive from the
temp file instead of buffering every chunk in memory.

* test(k8s_cp): split combined assert into separate statements

Addresses review feedback on #1217.

* chore(changelog): link the PR and use single-line fragment entries

* fix(linter): reformat with black

* fix(linter): sort imports in test_copy.py

isort --profile black puts ansible_collections in the same third-party
section as pytest, so the blank line between them is a failure.

* fix(k8s_cp): report what tar said when the copy fails early

An early close or a stall is the symptom; tar has usually already
written the cause (a read-only mount, a missing directory) to stderr,
and drain() has it. Discarding it left only the generic truncation or
timeout message.

* refactor(k8s_cp): move the stderr suffix into _fail

The nested fail() helper added a branch inside a closure, which counts
double for nesting and took _stream_tar_to_pod over Sonar's cognitive
complexity limit (14 -> 16). _fail already had the response; give it
the stderr too.

* test(k8s_cp): tempfile for the repeated-copy test directory

Co-authored-by: Bikouo Aubin <79859644+abikouo@users.noreply.github.com>

---------

Co-authored-by: Bikouo Aubin <79859644+abikouo@users.noreply.github.com>
2026-09-15 09:20:10 +01:00
Bikouo AubinandGitHub bd1cacc0cf address sanity issues (#1056)
SUMMARY


helm/helm_info - Deprecate some parameters and add new ones to resolve sanity issues.
k8s - the return block doc is not aligned with what the module returns


ISSUE TYPE


Bugfix Pull Request

COMPONENT NAME

helm, helm_info, k8s
Fixes: #1046

Reviewed-by: Yuriy Novostavskiy <yuriy@novostavskiy.kyiv.ua>
Reviewed-by: Bianca Henderson <beeankha@gmail.com>
2026-01-14 08:22:31 +00:00
Yorick GruijthuijzenandGitHub 027700c3f4 Added support for copying files to init Containers. (#971)
SUMMARY
Was going trough the list with issues and found 958; which seemed a quick fix.
What I fixed with with this PR:

Added support for copying files to init containers.
Fixed the format message when an exec is failing for a pod (the order was wrong).
Added a check if the container that you try to run copy for is started.

ISSUE TYPE

Bugfix Pull Request

COMPONENT NAME
copy.py module
ADDITIONAL INFORMATION
Some testing.
Verify that the pod does not exist:
kubectl -n default get pod/yorick
Output:
Error from server (NotFound): pods "yorick" not found

Run the playbook to create the file, create the deployment, wait for the init container to be ready, copy the created file to the init container, cat the copied file (using kubernetes.core.k8s_exec) that is now in the init container and try to copy the created file to the (not started) container (which fails - to see the new error message for it):
cat << EOF | ansible-playbook /dev/stdin
- hosts: localhost
  gather_facts: False
  tasks:

  - ansible.builtin.copy:
      content: |
        Hi there
      dest: /tmp/yorick.txt

  - name: Deploy pod with initContainer with an unlimited while loop
    kubernetes.core.k8s:
      kubeconfig: "~/.kube/config"
      definition:
        apiVersion: v1
        kind: Pod
        metadata:
          name: "yorick"
          namespace: "default"
        spec:
          initContainers:
            - name: "yorick-init"
              image: busybox:latest
              command: ["/bin/sh"]
              args:
                - "-c"
                - |
                  echo "Init container started, waiting for file..."
                  # Wait for the file to be copied
                  while :;do
                    echo "Waiting for file"
                    sleep 5
                  done
                  echo "File received! Init container completing..."
          containers:
            - name: "yorick-container"
              image: busybox:latest
              command: ["/bin/sh"]
              args:
                - "-c"
                - |
                  # Keep container running for testing
                  sleep 300

  - kubernetes.core.k8s_info:
      kubeconfig: "~/.kube/config"
      api_version: v1
      kind: Pod
      name: "yorick"
      namespace: "default"
    register: pod_status
    until: >-
      pod_status.resources|length > 0
      and 'initContainerStatuses' in pod_status.resources.0.status
      and pod_status.resources.0.status.initContainerStatuses|length > 0
      and pod_status.resources.0.status.initContainerStatuses.0.started|bool

  - name: Copy /tmp/yorick.txt to the yorick-init init container
    kubernetes.core.k8s_cp:
      kubeconfig: "~/.kube/config"
      namespace: default
      pod: yorick
      remote_path: /tmp/yorick.txt
      local_path: /tmp/yorick.txt
      container: yorick-init

  - name: Execute a command
    kubernetes.core.k8s_exec:
      kubeconfig: "~/.kube/config"
      namespace: default
      pod: yorick
      container: yorick-init
      command: cat /tmp/yorick.txt
    register: exec_out

  - ansible.builtin.debug:
      var: exec_out.stdout

  - name: Try to copy /tmp/yorick.txt to the yorick-container container
    kubernetes.core.k8s_cp:
      kubeconfig: "~/.kube/config"
      namespace: default
      pod: yorick
      remote_path: /tmp/yorick.txt
      local_path: /tmp/yorick.txt
      container: yorick-container
EOF
Output:
PLAY [localhost] ********************************************************************************************************************************************************************

TASK [ansible.builtin.copy] *********************************************************************************************************************************************************
Thursday 31 July 2025  02:01:21 +0200 (0:00:00.016)       0:00:00.016 *********
ok: [localhost]

TASK [Deploy pod with initContainer with an unlimited while loop] *******************************************************************************************************************
Thursday 31 July 2025  02:01:21 +0200 (0:00:00.788)       0:00:00.804 *********
changed: [localhost]

TASK [kubernetes.core.k8s_info] *****************************************************************************************************************************************************
Thursday 31 July 2025  02:01:25 +0200 (0:00:03.963)       0:00:04.768 *********
FAILED - RETRYING: [localhost]: kubernetes.core.k8s_info (3 retries left).
ok: [localhost]

TASK [Copy /tmp/yorick.txt to the yorick-init init container] ***********************************************************************************************************************
Thursday 31 July 2025  02:01:32 +0200 (0:00:06.598)       0:00:11.366 *********
changed: [localhost]

TASK [Execute a command] ************************************************************************************************************************************************************
Thursday 31 July 2025  02:01:39 +0200 (0:00:07.017)       0:00:18.383 *********
changed: [localhost]

TASK [ansible.builtin.debug] ********************************************************************************************************************************************************
Thursday 31 July 2025  02:01:40 +0200 (0:00:00.644)       0:00:19.028 *********
ok: [localhost] => {
    "exec_out.stdout": "Hi there\n"
}

TASK [Try to copy /tmp/yorick.txt to the yorick-container container] ****************************************************************************************************************
Thursday 31 July 2025  02:01:40 +0200 (0:00:00.021)       0:00:19.050 *********
fatal: [localhost]: FAILED! => {
    "changed": false
}

MSG:

Pod container yorick-container is not started

PLAY RECAP **************************************************************************************************************************************************************************
localhost                  : ok=6    changed=3    unreachable=0    failed=1    skipped=0    rescued=0    ignored=0

Playbook run took 0 days, 0 hours, 0 minutes, 21 seconds

Reviewed-by: spatterlight
Reviewed-by: Yorick Gruijthuijzen <yorick-1989@hotmail.com>
Reviewed-by: Bianca Henderson <beeankha@gmail.com>
Reviewed-by: Bikouo Aubin
2025-09-24 20:36:56 +00:00
b066a2dda3 Cleanup GitHub workflows (#655)
* Cleanup gha

* test by removing matrix excludes

* Rename sanity tests

* trigger integration tests

* Fix ansible-lint workflow

* Fix concurrency

* Add ansible-lint config

* Add ansible-lint config

* Fix integration and lint issues

* integration wf

* fix yamllint issues

* fix yamllint issues

* update readme and add ignore-2.16.txt

* fix ansible-doc

* Add version

* Use /dev/random to generate random data

The GHA environment has difficultly generating entropy. Trying to read
from /dev/urandom just blocks forever. We don't care if the random data
is cryptographically secure; it's just garbage data for the test. Read
from /dev/random, instead. This is only used during the k8s_copy test
target.

This also removes the custom test module that was being used to generate
the files. It's not worth maintaining this for two task that can be
replaced with some simple command/shell tasks.

* Fix saniry errors

* test github_action fix

* Address review comments

* Remove default types

* review comments

* isort fixes

* remove tags

* Add setuptools to venv

* Test gh changes

* update changelog

* update ignore-2.16

* Fix indentation in inventory plugin example

* Update .github/workflows/integration-tests.yaml

* Update integration-tests.yaml

---------

Co-authored-by: Mike Graves <mgraves@redhat.com>
Co-authored-by: Bikouo Aubin <79859644+abikouo@users.noreply.github.com>
2023-11-10 16:33:40 +01:00
Bikouo AubinandGitHub 42ee210ecf k8s_cp - fix issue when directory contains space in its name (#552)
k8s_cp - fix issue when directory contains space in its name

Depends-On: #549
SUMMARY

There is a remaining issue not addressed by  #512 when copying directory from Pod to local filesystem, if the directory contains space into its name, the directory was not copied

ISSUE TYPE


Bugfix Pull Request

COMPONENT NAME

k8s_cp
ADDITIONAL INFORMATION

Reviewed-by: Mike Graves <mgraves@redhat.com>
Reviewed-by: Bikouo Aubin <None>
2022-12-15 18:17:21 +00:00
Bikouo AubinandGitHub 979b492233 k8s_cp: add support for check_mode, fix doc issue, remove dependency with 'find' when state=from_pod (#512)
k8s_cp: add support for check_mode, fix doc issue, remove dependency with 'find' when state=from_pod

Depends-On: ansible/ansible-zuul-jobs#1635
Depends-On: ansible/ansible-zuul-jobs#1636
Depends-On: #518
Depends-On: #520
SUMMARY

add support for check_mode, closes #380
fix doc issue, closes #485
Remove dependency with 'find' executable when state=from_pod, closes #486

ISSUE TYPE


Bugfix Pull Request
Docs Pull Request
Feature Pull Request

Reviewed-by: Gonéri Le Bouder <goneri@lebouder.net>
Reviewed-by: Mike Graves <mgraves@redhat.com>
Reviewed-by: Bikouo Aubin <None>
2022-12-09 16:00:14 +00:00
abikouoandGitHub fd61f8b15d Move integration test suite from molecule to ansible-test (#392)
Move integration test suite from molecule to ansible-test

SUMMARY

molecule has been replaced with ansible-test
some test cases have been updated

k8s_apply : remove duplicated tasks increasing the running time of the test
helm: use different namespaces for different test cases in order to wait for the namespace deletion before moving to the next test.
all: remove wait: yes at the end of each test when deleting namespace, the role used to create namespace will ensure that it is deleted before if existing.


ISSUE TYPE


Feature Pull Request

COMPONENT NAME

integration testing

Reviewed-by: Mike Graves <mgraves@redhat.com>
Reviewed-by: Gonéri Le Bouder <goneri@lebouder.net>
Reviewed-by: None <None>
2022-03-11 08:03:00 +00:00