This patch changes auth_ind variable to receive a list of values
instead of a single one, so that more than one value can be set
at once.
Tests have been updated to reflect the change.
When using a variable that is invalid for a given action, the `action`
was not being displayed in the error message, leading to a poor user
experience.
This patch explicitly set `no_log` option for `update_password` attribute
to `False`, so that the warning on `no_log` not being set is not issued
anymore. Ansible incorrectly issued the warning, as `update_password` does
not carry sensitive information.
This patch fixes handling of password and public_key files, parameter
validation depending on vault type, usage of `salt` attribute and data
retrieval.
Tests were updated to reflect the changes.
New example playbooks are added:
playbooks/vault/vault-is-present-with-password-file.yml
playbooks/vault/vault-is-present-with-public-key-file.yml
playbooks/vault/retrive-data-asymmetric-vault.yml
playbooks/vault/retrive-data-symmetric-vault.yml
Since ipahost uses dnsrecord-show, it raises an error when DNS zone is
not found, but it should not be an ipahost concern.
This patch fixes this behavior by returning no record if DNS zone is
not found, so processing resumes as if there is no record for the host.
It fixes behavior when `state: absent` and dnszone does not exist, so,
host should not exist either, and the ipahost answer is correct and
indifferent to DNS Zone state.
The `services` member and ownership atttributes were missing from
vault module. This change adds them.
Handling of owner and ownergroups needed to be changed to fix `services`
and, due to this, have also been fixed.
IPA CLI allows the creation of vaults without specifying user, service or a
shared vault, defaulting to create a user vault for the `admin` user. The
vault module, required that one of user, service or shared was explicitly
provided, and this patch makes the module behave like the CLI command.
Tests were added to reflect this change.
certmapdata was not processed properly. The certificate was not loaded and
therefore the `issuer` and `subject` could not be compared to the
certmapdata entries in the user record. The function `load_cert_from_str`
from ansible_freeipa_moduleis used for this.
Additionally there was no way to use the certmapdata data format. This
is now possible with the `data` option in the certmapdata dict.
Example: "data: X509:<I>dc=com,dc=example,CN=ca<S>dc=com,dc=example,CN=test"
`data` may not be used together with `certificate`, `issuer` and `subject`
in the same record.
Given certmapdata for the ipauser module is now converted to the internal
data representation using also the new function `DN_x500_text` from
`ansible_freeipa_module`.
New functions `convert_certmapdata` and `check_certmapdata` have been added
to ipauser.
tests/user/certmapdata/test_user_certmapdata.yml has been extended with
additional tasks to verify more complex issuer and subjects and also using
the data format.
This function can be used to check if a command is available in the API.
This is used in ipauser module to check if user_add_certmapdata is available
in the API.
This function is needed to properly convert issuer and subject from a
certificate or the issuer and subject parameters in ipauser for certmapdata
to the data representation where the items in DN are reversed.
The function additionally provides a fallback solution for IPA < 4.5.
Certmapdata is not supported for IPA < 4.5, but the conversion is done
before the API version can be checked.
For certmapdata processing in ipauser it is needed to be able to load a cert
from a string given in the task to be able to get the issuer and subject of
the certificate. The format of the certifiacte here is lacking the markers
for the begin and end of the certificate. Therefore load_pem_x509_certificate
can not be used directly. Also in IPA < 4.5 it is needed to load the
certificate with load_certificate instead of load_pem_x509_certificate. The
function is implementing this properly.
group_remove_member is not able to handle services in old IPA releases.
In one case the check was missing and the removal of a user from a group
failed because of this with an older IPA version. The missing check has
been added.
Fixes#257 (ipagroup fails to remove user from group ipausers)
The host_find command had to be replaced to get the "has_password" and
"has_keytab" return values. This commit replaces the dnsrecord_find
with the dnsrecord_show command to have consistent find functions in
the module.
If random is enabled and update_password is limited to "create_only", the
random password may only be changed if the host does not exist yet.
Additionally the generation of the random password will fail, if the host
is already enrolled if update_password is "always" (default value). An
error will be reported early in this case now.
The command host_show is now used instead of host_find, as `has_password`
and `has_keytab` are only returned by host_show, but not by host_find. The
find_host function has been adapated for this change.
Resolves: #253 (ipahost is not idempotent)
The find_user function was not using encode_certificate for certificates
that are stored in the user record. This could lead to some issues with
older ipa releases and Python 2.
Because of a missing check member attributes (for use with action: member)
are cleared when a non-member attribute is changed. The fix simply adds a
check for None (parameter not set) to gen_add_del_lists in
ansible_freeipa_module to make sure that the parameter is only changed if
it should be changed.
All places where the add and removal lists have been generated manually
have been changed to also use gen_add_del_lists.
Resolves: #252 (The "Manager" attribute is removed when updating any user
attribute)
Even after obtaining Kerberos TGT with temp_kinit(), when connecting to
the IPA API with context `ansible-freeipa`, the API commands complained
that Kerberos credentials were not available. This patch fixes this
behavior.
In the case that the admin password has been set and become was not set
the call to backend.connect in api_connect failed. The solution is simply
to set os.environ["KRB5CCNAME"] in temp_kinit after kinit_password has
been called using the temporary ccache. os.environ["KRB5CCNAME"] is not
used automatically by api.Backend.[ldap2,rpcclient].connect. Afterwards
os.environ["KRB5CCNAME"] is unset in temp_kdestroy if ccache_name is not
None.
Fixes: #249 (Kerberos errors while using the modules with a non-sudoer user)
This patch allows the removal of option `all` from user, host, group,
runasuser, and runasgroup categories, by allowing an empty string as
a valid choice for each option.
When accessing an instance of AnsibleFreeIPAParams with .get the obj was
by-passing the call to _afm_convert which was the primaty reason why it
was created.
Also the class now extends Mapping instead of dict.
There is a new management module placed in the plugins folder:
plugins/modules/ipadnszone.py
The dnszone module allows to manage DNS zones.
Here is the documentation for the module:
README-dnszone.md
New example playbooks have been added:
playbooks/dnszone/disable-zone-forwarders.yml
playbooks/dnszone/dnszone-absent.yml
playbooks/dnszone/dnszone-all-params.yml
playbooks/dnszone/dnszone-disable.yml
playbooks/dnszone/dnszone-enable.yml
playbooks/dnszone/dnszone-present.yml
New tests for the module:
tests/dnszone/test_dnszone.yml
tests/dnszone/test_dnszone_mod.yml
Due to setting aaaa_extra_create_reverse or a_extra_create_reverse when not
needed, host module fails to add a host with reverse address. This patch
fixes the behavior by only adding *_extra_create_reverse when needed.
There is a new vaultcontainer management module placed in the plugins folder:
plugins/modules/ipadnsconfig.py
The dnsconfig module allows to modify global DNS configuration.
Here is the documentation for the module:
README-dnsconfig.md
New example playbooks have been added:
playbooks/dnsconfig/set_configuration.yml
playbooks/dnsconfig/disable-global-forwarders.yml
playbooks/dnsconfig/disallow-reverse-sync.yml
New tests for the module:
tests/dnsconfig/test_dnsconfig.yml
