When `auth-ind` was empty, and it was set to be cleared, it might have
triggered an uncessary change. This change add a test so that `auth-ind`
is set only if needed.
In current implementation, when using `smb: yes`, only a small subset
of the attributes can be used in the playbook. This happened due the
use of `service_add_smb`, which adds a new service and does not modify
an existing one, and not coping with attributes not supported by this
IPA API call.
The implementation was modified so that a service with `smb: true` is
treated like any other service, which, in effect, simplified and fixed
service search, and allowed for the use of the same attributes as with
any service. Although simplified, when using `smb: true` an extra
query is done against the LDAP server, as a second `service_show` is
performed.
Tests have been updated to reflect the new imprlementation.
A dnszone_mod call is always made to set the serial for a zone even if
this serial is set already.
A check is added to make sure that the serial is only set with
dnszone_mod if there is no serial set or if the serial is different.
The "DNS resource record not found" error occurs when a host arecord
or aaaarecord member is ensured to be absent and no dnsrecord entry
for the host exists.
The arecord or aaaarecord item are removed from dnsrecord_args if the
record is not defined in res_find_dnsrecord.
A repeated category reset of usercategory, hostcategory, cmdcaterory,
runasusercategory and hostcategory is resulting in the error
"no modifications to be performed".
The empty categories are now removed from the args if the category is
not set in the sudorule.
There is a new server management module placed in the plugins folder:
plugins/modules/ipaserver.py
The server module allows to ensure presence and absence of servers. The
module requires an existing server, the deployment of a new server can
not be done with the module.
DNSName has been added to ansible_freeipa_module in plugins/module_utils
as this is used for locations.
Here is the documentation for the module:
README-server.md
New example playbooks have been added:
playbooks/server/server-absent-continue.yml
playbooks/server/server-absent-force.yml
playbooks/server/server-absent-ignore_last_of_role.yml
playbooks/server/server-absent-ignore_topology_disconnect.yml
playbooks/server/server-absent.yml
playbooks/server/server-hidden.yml
playbooks/server/server-location.yml
playbooks/server/server-no-location.yml
playbooks/server/server-no-service-weight.yml
playbooks/server/server-not-hidden.yml
playbooks/server/server-present.yml
playbooks/server/server-service-weight.yml
New tests for the module:
tests/server/test_server.yml
Change in module_utils/ansible_freeipa_module:
DNSName is imported from ipapython.dnsutil and also added to __all__
Module was raising exceptions when trying to create a new privilege
with permissions. This change fixes the behavior and ensuure
idempotence with trying to create a privilege with the same values.
Tests for this behavior have been appended to:
tests/privilege/test_privilege.yml
Fixed names of sudorule member objects, as they did not match the names provided by IdM.
From: To:
member_host memberhost_host
member_hostgroup memberhost_hostgroup
member_user memberuser_user
member_group memberuser_group
Fixes: #500
In `ipapermission` plugin, Some attributtes were not being managed
when `action: member` was enabled.
This patch enable member management for `right`, `rawfilter`,
`filter, and fixes management of `memberof`.
Fix issue #489
When adding A or AAAA records using the compatibility mode with
Ansible's community general plugin, the reverse (PTR) record was
added, but the A/AAAA record was not. This patch fixes the behavior.
Fix issue #491
The attrs handling was not complete and did not support to ensure presence
or absence of attributes with action:member.
The includedattrs and excludedattrs parameters have not been added with
this change as the use of attrs will automatically set includedattrs and
excludedattrs. The includedattrs and excludedattrs parameters are only
usable for managed permissions and duplicating attrs.
The permission module may not handle privileges. An IPA internal only API
has been used for this. The prvilege variable and all related code paths
have been removed.
Fixes: #424 ([Permission Handling] Not able to add additional attributes
with existing attributes)
Fixes: #425 ([Permission Handling] Not able to add member privilege while
adding permission)
Added code to the ipa* plugins to support Ansible's check_mode, by
means of a clean exit before the execution of the actual list of
commands that would otherwise create/update/delete IPA servers
and/or its resources.
Current implementation does not allow the change of an existingi Vault
type. To allow it, data is retrieved from the current vault, the vault
is modifiend, and then, data is stored again in the new vault.
Due to changing the process of modifying a vault, this change also
fixes the update of asymmetric vault keys. To change the key used,
the task must provide the old private key, used to retrieve data,
and the new public_key, used to store the data again. A new alias
was added to public_key (new_public_key) and public_key_file
(new_public_key_file) so that the playbook better express the
intention of the tak.
Vault tests have been updated to better test against the new update
process, and a new test file has bee added:
tests/vault/test_vault_change_type.
In FreeIPA CLI, The attributes `allow_query` and `allow_transfer` can
hold IPv4 or IPv6 address or network address, and the values `none` and
`any`.
This patch adds support for network addresses, `none` and `any`, which
were not supported.
Fix issue #475.
When adding new members to a role, the existing members were removed.
The correct behavior for the "member" action is to add those members,
and substitute the existing ones. This patch fixes this behavior.
Fix#409, #411, #412, #413
This PR fixes the creation of sudocmdgroups when the sudocmds are
specified, allowing groups to be created with sudocmd members in a
single task.
Fix issue #440.
When using ipahost module with servers where DNS was not configured
it failed to add hosts due to an exception raised on `dnsrecord_show`
that was not being correctly handled.
As the exception was being handled twice, the This patch simply removes
one of the handlers, allowing the exception to propagate to the caller,
where it is handled.
Fixes issue #434.
There was a failure when NAPTR or DLV records where updated,
if the record name had multiple entries. This patch fixes this
behavior, by using the requested record, not the retrieved one.
Tests have been updated to test for this issue on
tests/dnsrecord/test_dnsrecord.yml
Due to an issue with FreeIPA, when modifying the SOA serial attribute
along with other attributes, the value is ignored. In order to have
the value provided, the attribute is set is a later call to dnszone-mod
allowing it to retain the desired value.
Ref: https://pagure.io/freeipa/issue/8489
Examples of dnsforwarzone were using a single string rather than a
dict of values to set attribute `forwarders`. Both source code and
README examples were fixed.
Fix issue #446
When modifying a record, depending on how the playbook tasks were
arranged, it was possible to end with more records than expected.
This behavior was fixed by modifying the way records are searched
when a modification is requested. This change also allows less calls
find_dnsrecord.
Tests were modified to reflect the changes, and a new test playbook
was added:
tests/dnsrecord/test_dnsrecord_modify_record.yml
FreeIPA 4.8.7 has introduced bind type 'self' as a valid value, and
this PR adds checks so the module fails early if the value is used
with an unsupported version.
Tests and documentation have been updated to reflect the changes.
Due to Ansible filtering out values in the output that might be match
values in sensible attributes that have `no_log` set, if a module need
to return data to the controller, it cannot rely on
`ansible_module.exit_json` if there is a chance that a partial match
may occur.
See: https://github.com/ansible/ansible/issues/71789
The change provided here uses the same implementation that is used on
Ansible's `AnsibleModule.exit_json`, without the data filtering layer,
so every attribute with be printed and, therefore, logged by Ansible.
This is needed for the Vault module, as we need to return values that
are explicit requested by the user and that might, at least partially,
match the values in attributes with `no_log` set.
Tests that reproduced the issue, and show it was fixed were provided
for all Vault types.
There is a new permission management module placed in the plugins folder:
plugins/modules/ipapermission.py
The permission module allows to ensure presence of absence of permissions
and manage permission members.
Here is the documentation for the module:
README-permission.md
New example plabooks have been added:
playbooks/permission/permission-absent.yml
playbooks/permission/permission-allow-read-employeenum.yml
playbooks/permission/permission-member-absent.yml
playbooks/permission/permission-member-present.yml
playbooks/permission/permission-present.yml
playbooks/permission/permission-renamed.yml
New tests for the module:
tests/permission/test_permission.yml
This patch add support for adding external members to ipagroup which
have the `external` attribute set. It adds another attribute to the
module, `external_members`, which is a list of users or groups from
an external trust, to be added to the group.
This patch requires server-trust-ad to be tested, as such, the tests
have been guarded by a test block, for when such tests are available
in ansible-freeipa CI.
Fixes issue #418
ansible-doc is reporting several issues in modules. Most of them have benn
due to misspelled description key word or due to use of multi line text
without the | in the description line.
When using changing passwords, using password files, the file name was
being used as the password, and not its content. This patch fixes the
behavior to use the contents of the password file.
Tests have been added to ensure the correct behavior.
When retrieving data from a vault using `out` to store the data in a
file resulted is random characters being returned and logged. These
characters could generate a traceback print from Ansible's logger,
without breaking the script.
The reason for that is that the result from `vault_retrive` was being
processed when it was not needed, and data was beeing returned, when
it shouldn't.
This patch fixes this behavior by supressing the return data when `data`
is not available, and only raising an error if it should be available.
