Fix missing-final-newline error

.azure-pipelines/azure-pipelines.yml

@@ -50,42 +50,6 @@ stages:
       - template: templates/matrix.yml
         parameters:
           testFormat: devel/linux/{0}/1
-          targets:
-            - name: CentOS 7
-              test: centos7
-            - name: Fedora 37
-              test: fedora37
-            - name: openSUSE 15 py3
-              test: opensuse15
-            - name: Ubuntu 20.04
-              test: ubuntu2004
-            - name: Ubuntu 22.04
-              test: ubuntu2204
-  - stage: Docker_2_15
-    displayName: Docker 2.15
-    dependsOn: []
-    jobs:
-      - template: templates/matrix.yml
-        parameters:
-          testFormat: 2.15/linux/{0}/1
-          targets:
-            - name: CentOS 7
-              test: centos7
-            - name: Fedora 37
-              test: fedora37
-            - name: openSUSE 15 py3
-              test: opensuse15
-            - name: Ubuntu 20.04
-              test: ubuntu2004
-            - name: Ubuntu 22.04
-              test: ubuntu2204
-  - stage: Docker_2_14
-    displayName: Docker 2.14
-    dependsOn: []
-    jobs:
-      - template: templates/matrix.yml
-        parameters:
-          testFormat: 2.14/linux/{0}/1
           targets:
             - name: CentOS 7
               test: centos7
@@ -153,12 +117,18 @@ stages:
               test: centos6
             - name: CentOS 7
               test: centos7
+            - name: Fedora 32
+              test: fedora32
+            - name: Fedora 33
+              test: fedora33
             - name: openSUSE 15 py2
               test: opensuse15py2
             - name: openSUSE 15 py3
               test: opensuse15
             - name: Ubuntu 18.04
               test: ubuntu1804
+            - name: Ubuntu 20.04
+              test: ubuntu2004
   - stage: Docker_2_10
     displayName: Docker 2.10
     dependsOn: []
@@ -171,6 +141,10 @@ stages:
               test: centos6
             - name: CentOS 7
               test: centos7
+            - name: Fedora 30
+              test: fedora30
+            - name: Fedora 31
+              test: fedora31
             - name: openSUSE 15 py2
               test: opensuse15py2
             - name: openSUSE 15 py3
@@ -191,6 +165,10 @@ stages:
               test: centos6
             - name: CentOS 7
               test: centos7
+            - name: Fedora 30
+              test: fedora30
+            - name: Fedora 31
+              test: fedora31
             - name: openSUSE 15 py2
               test: opensuse15py2
             - name: openSUSE 15 py3
@@ -208,46 +186,6 @@ stages:
       - template: templates/matrix.yml
         parameters:
           testFormat: devel/{0}/1
-          targets:
-            - name: MacOS 13.2
-              test: macos/13.2
-            - name: RHEL 7.9
-              test: rhel/7.9
-            - name: RHEL 8.7
-              test: rhel/8.7
-            - name: RHEL 9.1
-              test: rhel/9.1
-            - name: FreeBSD 12.4
-              test: freebsd/12.4
-            - name: FreeBSD 13.1
-              test: freebsd/13.1
-  - stage: Remote_2_15
-    displayName: Remote 2.15
-    dependsOn: []
-    jobs:
-      - template: templates/matrix.yml
-        parameters:
-          testFormat: 2.15/{0}/1
-          targets:
-            - name: MacOS 13.2
-              test: macos/13.2
-            - name: RHEL 7.9
-              test: rhel/7.9
-            - name: RHEL 8.7
-              test: rhel/8.7
-            - name: RHEL 9.1
-              test: rhel/9.1
-            - name: FreeBSD 12.4
-              test: freebsd/12.4
-            - name: FreeBSD 13.1
-              test: freebsd/13.1
-  - stage: Remote_2_14
-    displayName: Remote 2.14
-    dependsOn: []
-    jobs:
-      - template: templates/matrix.yml
-        parameters:
-          testFormat: 2.14/{0}/1
           targets:
             - name: MacOS 12.0
               test: macos/12.0
@@ -257,8 +195,6 @@ stages:
               test: rhel/8.6
             - name: RHEL 9.0
               test: rhel/9.0
-            - name: FreeBSD 12.3
-              test: freebsd/12.3
             - name: FreeBSD 13.1
               test: freebsd/13.1
   - stage: Remote_2_13
@@ -357,10 +293,6 @@ stages:
       - Docker_2_12
       - Remote_2_13
       - Docker_2_13
-      - Remote_2_14
-      - Docker_2_14
-      - Remote_2_15
-      - Docker_2_15
       - Remote_devel
       - Docker_devel
     jobs:

CHANGELOG.rst

@@ -5,68 +5,6 @@ ansible.posix Release Notes
 .. contents:: Topics
 
 
-v1.5.4
-======
-
-Minor Changes
--------------
-
-- json and jsonl - Add the ``ANSIBLE_JSON_INDENT`` parameter
-- json and jsonl - Add the ``path`` attribute into the play and task output
-
-Bugfixes
---------
-
-- Fix sysctl integration test failing on newer versions of core. Previously NoneType was allowable, now it fails to convert to a str type.
-- Support new sanity test for the ansible-core devel branch CI test (https://github.com/ansible-collections/ansible.posix/issues/446).
-- firewall - Fix issue where adding an interface to a zone would fail when the daemon is offline
-- firewall - Fix issue where opening a specific port resulted in opening the whole protocol of the specified port
-- firewalld - Consider value of masquerade and icmp_block_inversion parameters when a boolean like value is passed
-
-v1.5.2
-======
-
-Release Summary
----------------
-
-This is the minor release of the ``ansible.posix`` collection.
-This changelog contains all changes to the modules and plugins
-in this collection that have been added after the release of
-``ansible.posix`` 1.5.1.
-
-Minor Changes
--------------
-
-- Add jsonl callback plugin to ansible.posix collection
-- firewalld - add `protocol` parameter
-
-Bugfixes
---------
-
-- Fixed a bug where firewalld module fails to create/remove zones when the daemon is stopped
-- rhel_facts - Call exit_json with all keyword arguments
-
-v1.5.1
-======
-
-Minor Changes
--------------
-
-- mount - Add ``absent_from_fstab`` state (https://github.com/ansible-collections/ansible.posix/pull/166).
-- mount - Add ``ephemeral`` value for the ``state`` parameter, that allows to mount a filesystem without altering the ``fstab`` file (https://github.com/ansible-collections/ansible.posix/pull/267).
-- r4e_rpm_ostree - new module for validating package state on RHEL for Edge
-- rhel_facts - new facts module to handle RHEL specific facts
-- rhel_rpm_ostree - new module to handle RHEL rpm-ostree specific package management functionality
-- rpm_ostree_upgrade - new module to automate rpm-ostree upgrades
-- rpm_ostree_upgrade - new module to manage upgrades for rpm-ostree based systems
-
-Bugfixes
---------
-
-- Removed contentious terminology to match reference documentation in profile_tasks.
-- firewall - Fixed to output a more complete missing library message.
-- synchronize - Fixed hosts involved in rsync require the same password
-
 v1.4.0
 ======
 

README.md

@@ -33,9 +33,6 @@ Name | Description
 [ansible.posix.firewalld_info](https://github.com/ansible-collections/ansible.posix/blob/main/docs/ansible.posix.firewalld_info_module.rst)|Gather information about firewalld
 [ansible.posix.mount](https://github.com/ansible-collections/ansible.posix/blob/main/docs/ansible.posix.mount_module.rst)|Control active and configured mount points
 [ansible.posix.patch](https://github.com/ansible-collections/ansible.posix/blob/main/docs/ansible.posix.patch_module.rst)|Apply patch files using the GNU patch tool
-[ansible.posix.rhel_facts](https://github.com/ansible-collections/ansible.posix/blob/main/docs/ansible.posix.rhel_facts_module.rst)|Facts module to set or override RHEL specific facts.
-[ansible.posix.rhel_rpm_ostree](https://github.com/ansible-collections/ansible.posix/blob/main/docs/ansible.posix.rhel_rpm_ostree_module.rst)|Ensure packages exist in a RHEL for Edge rpm-ostree based system
-[ansible.posix.rpm_ostree_upgrade](https://github.com/ansible-collections/ansible.posix/blob/main/docs/ansible.posix.rpm_ostree_upgrade_module.rst)|Manage rpm-ostree upgrade transactions
 [ansible.posix.seboolean](https://github.com/ansible-collections/ansible.posix/blob/main/docs/ansible.posix.seboolean_module.rst)|Toggles SELinux booleans
 [ansible.posix.selinux](https://github.com/ansible-collections/ansible.posix/blob/main/docs/ansible.posix.selinux_module.rst)|Change policy and state of SELinux
 [ansible.posix.synchronize](https://github.com/ansible-collections/ansible.posix/blob/main/docs/ansible.posix.synchronize_module.rst)|A wrapper around rsync to make common tasks in your playbooks quick and easy

bindep.txt

@@ -1,4 +1,4 @@
 # This is a cross-platform list tracking distribution packages needed by tests;
 # see https://docs.openstack.org/infra/bindep/ for additional information.
 
-rsync [platform:redhat]
+rsync [platform:rhel-8 platform:rhel-9]

changelogs/changelog.yaml

@@ -260,90 +260,3 @@ releases:
     - sanity_fixes.yml
     - shell_escape_full_path_for_rsync.yml
     release_date: '2022-05-23'
-  1.5.1:
-    changes:
-      bugfixes:
-      - Removed contentious terminology to match reference documentation in profile_tasks.
-      - firewall - Fixed to output a more complete missing library message.
-      - synchronize - Fixed hosts involved in rsync require the same password
-      minor_changes:
-      - mount - Add ``absent_from_fstab`` state (https://github.com/ansible-collections/ansible.posix/pull/166).
-      - mount - Add ``ephemeral`` value for the ``state`` parameter, that allows to
-        mount a filesystem without altering the ``fstab`` file (https://github.com/ansible-collections/ansible.posix/pull/267).
-      - r4e_rpm_ostree - new module for validating package state on RHEL for Edge
-      - rhel_facts - new facts module to handle RHEL specific facts
-      - rhel_rpm_ostree - new module to handle RHEL rpm-ostree specific package management
-        functionality
-      - rpm_ostree_upgrade - new module to automate rpm-ostree upgrades
-      - rpm_ostree_upgrade - new module to manage upgrades for rpm-ostree based systems
-    fragments:
-    - 166_mount_absent_fstab.yml
-    - 267_mount_ephemeral.yml
-    - 366_update_version_number_for_galaxy.yml
-    - 371_refactoring_ci_process_202206.yml
-    - 373_firewall_fix_missing_library_message.yml
-    - 375_update_azp_container.yml
-    - 380_update_usage_profile_tasks.yml
-    - 386_follow_ci_testing_rules.yml
-    - 389_ci_add_stable_214.yml
-    - 390_hosts_involved_same_password.yml
-    - 393-rpm-ostree.yml
-    - 393_rhel_for_edge.yml
-    - 400-fix-boolean-values-in-docs.yml
-    - 401_document_module_default_values.yml
-    - 407_fix_firewalld_port_test.yml
-    - 409_update_azp_matrix.yml
-    release_date: '2023-01-20'
-  1.5.2:
-    changes:
-      bugfixes:
-      - Fixed a bug where firewalld module fails to create/remove zones when the daemon
-        is stopped
-      - rhel_facts - Call exit_json with all keyword arguments
-      minor_changes:
-      - Add jsonl callback plugin to ansible.posix collection
-      - firewalld - add `protocol` parameter
-      release_summary: 'This is the minor release of the ``ansible.posix`` collection.
-
-        This changelog contains all changes to the modules and plugins
-
-        in this collection that have been added after the release of
-
-        ``ansible.posix`` 1.5.1.'
-    fragments:
-    - 1.5.2.yml
-    - 399_firewalld_create_remove_zone_when_offline.yml
-    - 413-synchronize-seealso.yml
-    - 417-add-protocol-parameter.yml
-    - 419-fix-patch-doc.yml
-    - 425-support_test-sanity-docker-devel.yml
-    - 426-firewalld_info-doc-update.yml
-    - 434-fix-rhel_facts-exit_json.yml
-    - 535-add-jsonl-callback.yml
-    release_date: '2023-04-07'
-  1.5.4:
-    changes:
-      bugfixes:
-      - Fix sysctl integration test failing on newer versions of core. Previously
-        NoneType was allowable, now it fails to convert to a str type.
-      - Support new sanity test for the ansible-core devel branch CI test (https://github.com/ansible-collections/ansible.posix/issues/446).
-      - firewall - Fix issue where adding an interface to a zone would fail when the
-        daemon is offline
-      - firewall - Fix issue where opening a specific port resulted in opening the
-        whole protocol of the specified port
-      - firewalld - Consider value of masquerade and icmp_block_inversion parameters
-        when a boolean like value is passed
-      minor_changes:
-      - json and jsonl - Add the ``ANSIBLE_JSON_INDENT`` parameter
-      - json and jsonl - Add the ``path`` attribute into the play and task output
-    fragments:
-    - 343-fix-profile_tasks-callback-documentation.yml
-    - 402_firewall_fix_offline_interface_add.yml
-    - 404_firewalld_masquerade_icmp_block_inversion_bugfixes.yml
-    - 440-json-add-path-field.yaml
-    - 441-json-add-indent-parameter.yaml
-    - 445_ci_support_stable-215.yml
-    - 448_support_new_sanity_test.yml
-    - 451_firewall_fix_protocol_parameter.yml
-    - 456_sysctl_fix_nonetype.yml
-    release_date: '2023-05-10'

changelogs/fragments/366_update_version_number_for_galaxy.yml

@@ -0,0 +1,3 @@
+---
+trivial:
+- Update version number in galaxy.yml to 1.5.0.

changelogs/fragments/371_refactoring_ci_process_202206.yml

@@ -0,0 +1,3 @@
+---
+trivial:
+- CI - Refactor AZP to address new test infrastructure (https://github.com/ansible-collections/news-for-maintainers/issues/17).

changelogs/fragments/373_firewall_fix_missing_library_message.yml

@@ -0,0 +1,3 @@
+---
+bugfixes:
+  - firewall - Fixed to output a more complete missing library message.

changelogs/fragments/375_update_azp_container.yml

@@ -0,0 +1,3 @@
+---
+trivial:
+  - CI - AZP test container to 3.0.0 (https://github.com/ansible-collections/news-for-maintainers/issues/18).

changelogs/fragments/380_update_usage_profile_tasks.yml

@@ -0,0 +1,3 @@
+---
+bugfixes:
+  - Removed contentious terminology to match reference documentation in profile_tasks.

changelogs/fragments/386_follow_ci_testing_rules.yml

@@ -0,0 +1,3 @@
+---
+trivial:
+  - CI - following the new CI testing rule ansible-test-sanity-docker-devel.

docs/ansible.posix.acl_module.rst

@@ -49,8 +49,8 @@ Parameters
                         </ul>
                 </td>
                 <td>
-                        <div>If the target is a directory, setting this to <code>true</code> will make it the default ACL for entities created inside the directory.</div>
-                        <div>Setting <code>default</code> to <code>true</code> causes an error if the path is a file.</div>
+                        <div>If the target is a directory, setting this to <code>yes</code> will make it the default ACL for entities created inside the directory.</div>
+                        <div>Setting <code>default</code> to <code>yes</code> causes an error if the path is a file.</div>
                 </td>
             </tr>
             <tr>
@@ -63,7 +63,6 @@ Parameters
                     </div>
                 </td>
                 <td>
-                        <b>Default:</b><br/><div style="color: blue">""</div>
                 </td>
                 <td>
                         <div>The actual user or group that the ACL applies to when matching entity types user or group are selected.</div>
@@ -286,7 +285,7 @@ Examples
         entity: joe
         etype: user
         permissions: rw
-        default: true
+        default: yes
         state: present
 
     - name: Same as previous but using entry shorthand

docs/ansible.posix.at_module.rst

@@ -171,7 +171,7 @@ Examples
         command: ls -d / >/dev/null
         count: 20
         units: minutes
-        unique: true
+        unique: yes
 
 
 

docs/ansible.posix.authorized_key_module.rst

@@ -139,8 +139,8 @@ Parameters
                 </td>
                 <td>
                         <div>Whether this module should manage the directory of the authorized key file.</div>
-                        <div>If set to <code>true</code>, the module will create the directory, as well as set the owner and permissions of an existing directory.</div>
-                        <div>Be sure to set <code>manage_dir=false</code> if you are using an alternate directory for authorized_keys, as set with <code>path</code>, since you could lock yourself out of SSH access.</div>
+                        <div>If set to <code>yes</code>, the module will create the directory, as well as set the owner and permissions of an existing directory.</div>
+                        <div>Be sure to set <code>manage_dir=no</code> if you are using an alternate directory for authorized_keys, as set with <code>path</code>, since you could lock yourself out of SSH access.</div>
                         <div>See the example below.</div>
                 </td>
             </tr>
@@ -212,9 +212,9 @@ Parameters
                 </td>
                 <td>
                         <div>This only applies if using a https url as the source of the keys.</div>
-                        <div>If set to <code>false</code>, the SSL certificates will not be validated.</div>
-                        <div>This should only set to <code>false</code> used on personally controlled sites using self-signed certificates as it avoids verifying the source site.</div>
-                        <div>Prior to 2.1 the code worked as if this was set to <code>true</code>.</div>
+                        <div>If set to <code>no</code>, the SSL certificates will not be validated.</div>
+                        <div>This should only set to <code>no</code> used on personally controlled sites using self-signed certificates as it avoids verifying the source site.</div>
+                        <div>Prior to 2.1 the code worked as if this was set to <code>yes</code>.</div>
                 </td>
             </tr>
     </table>
@@ -252,7 +252,7 @@ Examples
         state: present
         key: "{{ lookup('file', '/home/charlie/.ssh/id_rsa.pub') }}"
         path: /etc/ssh/authorized_keys/charlie
-        manage_dir: false
+        manage_dir: False
 
     - name: Set up multiple authorized keys
       ansible.posix.authorized_key:
@@ -275,14 +275,14 @@ Examples
         user: charlie
         state: present
         key: https://github.com/user.keys
-        validate_certs: false
+        validate_certs: False
 
     - name: Set authorized key, removing all the authorized keys already set
       ansible.posix.authorized_key:
         user: root
         key: "{{ lookup('file', 'public_keys/doe-jane') }}"
         state: present
-        exclusive: true
+        exclusive: True
 
     - name: Set authorized key for user ubuntu copying it from current user
       ansible.posix.authorized_key:
@@ -460,7 +460,7 @@ Common return values are documented `here <https://docs.ansible.com/ansible/late
                 </td>
                 <td>success</td>
                 <td>
-                            <div>This only applies if using a https url as the source of the keys. If set to <code>false</code>, the SSL certificates will not be validated.</div>
+                            <div>This only applies if using a https url as the source of the keys. If set to <code>no</code>, the SSL certificates will not be validated.</div>
                     <br/>
                         <div style="font-size: smaller"><b>Sample:</b></div>
                         <div style="font-size: smaller; color: blue; word-wrap: break-word; word-break: break-all;">True</div>

docs/ansible.posix.firewalld_info_module.rst

@@ -89,12 +89,7 @@ Examples
 
     - name: Gather information about active zones
       ansible.posix.firewalld_info:
-        active_zones: true
-      register: result
-
-    - name: Print default zone for debugging
-      ansible.builtin.debug:
-        var: result.firewalld_info.default_zone
+        active_zones: yes
 
     - name: Gather information about specific zones
       ansible.posix.firewalld_info:
@@ -102,7 +97,6 @@ Examples
           - public
           - external
           - internal
-      register: result
 
 
 
@@ -169,7 +163,7 @@ Common return values are documented `here <https://docs.ansible.com/ansible/late
                     <td class="elbow-placeholder">&nbsp;</td>
                 <td colspan="3">
                     <div class="ansibleOptionAnchor" id="return-"></div>
-                    <b>default_zone</b>
+                    <b>default_zones</b>
                     <a class="ansibleOptionLink" href="#return-" title="Permalink to this return value"></a>
                     <div style="font-size: small">
                       <span style="color: purple">string</span>

docs/ansible.posix.firewalld_module.rst

@@ -155,7 +155,7 @@ Parameters
                 <td>
                         <div>Should this configuration be in the running firewalld configuration or persist across reboots.</div>
                         <div>As of Ansible 2.3, permanent operations can operate on firewalld configs when it is not running (requires firewalld &gt;= 0.3.9).</div>
-                        <div>Note that if this is <code>false</code>, immediate is assumed <code>true</code>.</div>
+                        <div>Note that if this is <code>no</code>, immediate is assumed <code>yes</code>.</div>
                 </td>
             </tr>
             <tr>
@@ -262,21 +262,6 @@ Parameters
                 </td>
             </tr>
 
-            <tr>
-                <td colspan="2">
-                    <div class="ansibleOptionAnchor" id="parameter-"></div>
-                    <b>protocol</b>
-                    <a class="ansibleOptionLink" href="#parameter-" title="Permalink to this option"></a>
-                    <div style="font-size: small">
-                        <span style="color: purple">string</span>
-                    </div>
-                </td>
-                <td>
-                </td>
-                <td>
-                        <div>Name of a protocol to add/remove to/from firewalld.</div>
-                </td>
-            </tr>
             <tr>
                 <td colspan="2">
                     <div class="ansibleOptionAnchor" id="parameter-"></div>
@@ -429,35 +414,29 @@ Examples
     - name: permit traffic in default zone for https service
       ansible.posix.firewalld:
         service: https
-        permanent: true
-        state: enabled
-
-    - name: permit ospf traffic
-      ansible.posix.firewalld:
-        protocol: ospf
-        permanent: true
+        permanent: yes
         state: enabled
 
     - name: do not permit traffic in default zone on port 8081/tcp
       ansible.posix.firewalld:
         port: 8081/tcp
-        permanent: true
+        permanent: yes
         state: disabled
 
     - ansible.posix.firewalld:
         port: 161-162/udp
-        permanent: true
+        permanent: yes
         state: enabled
 
     - ansible.posix.firewalld:
         zone: dmz
         service: http
-        permanent: true
+        permanent: yes
         state: enabled
 
     - ansible.posix.firewalld:
         rich_rule: rule service name="ftp" audit limit value="1/m" accept
-        permanent: true
+        permanent: yes
         state: enabled
 
     - ansible.posix.firewalld:
@@ -468,44 +447,44 @@ Examples
     - ansible.posix.firewalld:
         zone: trusted
         interface: eth2
-        permanent: true
+        permanent: yes
         state: enabled
 
     - ansible.posix.firewalld:
-        masquerade: true
+        masquerade: yes
         state: enabled
-        permanent: true
+        permanent: yes
         zone: dmz
 
     - ansible.posix.firewalld:
         zone: custom
         state: present
-        permanent: true
+        permanent: yes
 
     - ansible.posix.firewalld:
         zone: drop
         state: enabled
-        permanent: true
-        icmp_block_inversion: true
+        permanent: yes
+        icmp_block_inversion: yes
 
     - ansible.posix.firewalld:
         zone: drop
         state: enabled
-        permanent: true
+        permanent: yes
         icmp_block: echo-request
 
     - ansible.posix.firewalld:
         zone: internal
         state: present
-        permanent: true
+        permanent: yes
         target: ACCEPT
 
     - name: Redirect port 443 to 8443 with Rich Rule
       ansible.posix.firewalld:
         rich_rule: rule family=ipv4 forward-port port=443 protocol=tcp to-port=8443
         zone: public
-        permanent: true
-        immediate: true
+        permanent: yes
+        immediate: yes
         state: enabled
 
 

docs/ansible.posix.mount_module.rst

@@ -73,7 +73,6 @@ Parameters
                         <div>For Solaris systems, <code>true</code> will set <code>yes</code> as the value of mount at boot in <em>/etc/vfstab</em>.</div>
                         <div>For Linux, FreeBSD, NetBSD and OpenBSD systems, <code>false</code> will add <code>noauto</code> to mount options in <em>/etc/fstab</em>.</div>
                         <div>To avoid mount option conflicts, if <code>noauto</code> specified in <code>opts</code>, mount module will ignore <code>boot</code>.</div>
-                        <div>This parameter is ignored when <em>state</em> is set to <code>ephemeral</code>.</div>
                 </td>
             </tr>
             <tr>
@@ -91,7 +90,7 @@ Parameters
                 <td>
                         <div>Dump (see fstab(5)).</div>
                         <div>Note that if set to <code>null</code> and <em>state</em> set to <code>present</code>, it will cease to work and duplicate entries will be made with subsequent runs.</div>
-                        <div>Has no effect on Solaris systems or when used with <code>ephemeral</code>.</div>
+                        <div>Has no effect on Solaris systems.</div>
                 </td>
             </tr>
             <tr>
@@ -111,7 +110,6 @@ Parameters
                         <div>This might be useful if you need to configure mountpoints in a chroot environment.</div>
                         <div>OpenBSD does not allow specifying alternate fstab files with mount so do not use this on OpenBSD with any state that operates on the live filesystem.</div>
                         <div>This parameter defaults to /etc/fstab or /etc/vfstab on Solaris.</div>
-                        <div>This parameter is ignored when <em>state</em> is set to <code>ephemeral</code>.</div>
                 </td>
             </tr>
             <tr>
@@ -127,7 +125,7 @@ Parameters
                 </td>
                 <td>
                         <div>Filesystem type.</div>
-                        <div>Required when <em>state</em> is <code>present</code>, <code>mounted</code> or <code>ephemeral</code>.</div>
+                        <div>Required when <em>state</em> is <code>present</code> or <code>mounted</code>.</div>
                 </td>
             </tr>
             <tr>
@@ -160,7 +158,7 @@ Parameters
                 <td>
                         <div>Passno (see fstab(5)).</div>
                         <div>Note that if set to <code>null</code> and <em>state</em> set to <code>present</code>, it will cease to work and duplicate entries will be made with subsequent runs.</div>
-                        <div>Deprecated on Solaris systems. Has no effect when used with <code>ephemeral</code>.</div>
+                        <div>Deprecated on Solaris systems.</div>
                 </td>
             </tr>
             <tr>
@@ -194,7 +192,7 @@ Parameters
                 </td>
                 <td>
                         <div>Device (or NFS volume, or something else) to be mounted on <em>path</em>.</div>
-                        <div>Required when <em>state</em> set to <code>present</code>, <code>mounted</code> or <code>ephemeral</code>.</div>
+                        <div>Required when <em>state</em> set to <code>present</code> or <code>mounted</code>.</div>
                 </td>
             </tr>
             <tr>
@@ -210,22 +208,18 @@ Parameters
                 <td>
                         <ul style="margin: 0; padding: 0"><b>Choices:</b>
                                     <li>absent</li>
-                                    <li>absent_from_fstab</li>
                                     <li>mounted</li>
                                     <li>present</li>
                                     <li>unmounted</li>
                                     <li>remounted</li>
-                                    <li>ephemeral</li>
                         </ul>
                 </td>
                 <td>
                         <div>If <code>mounted</code>, the device will be actively mounted and appropriately configured in <em>fstab</em>. If the mount point is not present, the mount point will be created.</div>
                         <div>If <code>unmounted</code>, the device will be unmounted without changing <em>fstab</em>.</div>
                         <div><code>present</code> only specifies that the device is to be configured in <em>fstab</em> and does not trigger or require a mount.</div>
-                        <div><code>ephemeral</code> only specifies that the device is to be mounted, without changing <em>fstab</em>. If it is already mounted, a remount will be triggered. This will always return changed=True. If the mount point <em>path</em> has already a device mounted on, and its source is different than <em>src</em>, the module will fail to avoid unexpected unmount or mount point override. If the mount point is not present, the mount point will be created. The <em>fstab</em> is completely ignored. This option is added in version 1.5.0.</div>
                         <div><code>absent</code> specifies that the device mount&#x27;s entry will be removed from <em>fstab</em> and will also unmount the device and remove the mount point.</div>
-                        <div><code>remounted</code> specifies that the device will be remounted for when you want to force a refresh on the mount itself (added in 2.9). This will always return changed=true. If <em>opts</em> is set, the options will be applied to the remount, but will not change <em>fstab</em>.  Additionally, if <em>opts</em> is set, and the remount command fails, the module will error to prevent unexpected mount changes.  Try using <code>mounted</code> instead to work around this issue.  <code>remounted</code> expects the mount point to be present in the <em>fstab</em>. To remount a mount point not registered in <em>fstab</em>, use <code>ephemeral</code> instead, especially with BSD nodes.</div>
-                        <div><code>absent_from_fstab</code> specifies that the device mount&#x27;s entry will be removed from <em>fstab</em>. This option does not unmount it or delete the mountpoint.</div>
+                        <div><code>remounted</code> specifies that the device will be remounted for when you want to force a refresh on the mount itself (added in 2.9). This will always return changed=true. If <em>opts</em> is set, the options will be applied to the remount, but will not change <em>fstab</em>.  Additionally, if <em>opts</em> is set, and the remount command fails, the module will error to prevent unexpected mount changes.  Try using <code>mounted</code> instead to work around this issue.</div>
                 </td>
             </tr>
     </table>
@@ -310,18 +304,10 @@ Examples
         src: 192.168.1.100:/nfs/ssd/shared_data
         path: /mnt/shared_data
         opts: rw,sync,hard
-        boot: false
+        boot: no
         state: mounted
         fstype: nfs
 
-    - name: Mount ephemeral SMB volume
-      ansible.posix.mount:
-        src: //192.168.1.200/share
-        path: /mnt/smb_share
-        opts: "rw,vers=3,file_mode=0600,dir_mode=0700,dom={{ ad_domain }},username={{ ad_username }},password={{ ad_password }}"
-        fstype: cifs
-        state: ephemeral
-
 
 
 

docs/ansible.posix.patch_module.rst

@@ -84,9 +84,9 @@ Parameters
                         </ul>
                 </td>
                 <td>
-                        <div>Setting to <code>true</code> will disable patch&#x27;s heuristic for transforming CRLF line endings into LF.</div>
+                        <div>Setting to <code>yes</code> will disable patch&#x27;s heuristic for transforming CRLF line endings into LF.</div>
                         <div>Line endings of src and dest must match.</div>
-                        <div>If set to <code>false</code>, <code>patch</code> will replace CRLF in <code>src</code> files on POSIX.</div>
+                        <div>If set to <code>no</code>, <code>patch</code> will replace CRLF in <code>src</code> files on POSIX.</div>
                 </td>
             </tr>
             <tr>
@@ -122,7 +122,7 @@ Parameters
                         </ul>
                 </td>
                 <td>
-                        <div>Setting to <code>true</code> will ignore white space changes between patch and input.</div>
+                        <div>Setting to <code>yes</code> will ignore white space changes between patch and input..</div>
                 </td>
             </tr>
             <tr>
@@ -141,7 +141,7 @@ Parameters
                         </ul>
                 </td>
                 <td>
-                        <div>If <code>false</code>, it will search for src at originating/controller machine, if <code>true</code> it will go to the remote/target machine for the <code>src</code>.</div>
+                        <div>If <code>no</code>, it will search for src at originating/controller machine, if <code>yes</code> it will go to the remote/target machine for the <code>src</code>.</div>
                 </td>
             </tr>
             <tr>
@@ -157,7 +157,7 @@ Parameters
                 <td>
                 </td>
                 <td>
-                        <div>Path of the patch file as accepted by the GNU patch tool. If <code>remote_src</code> is <code>false</code>, the patch source file is looked up from the module&#x27;s <em>files</em> directory.</div>
+                        <div>Path of the patch file as accepted by the GNU patch tool. If <code>remote_src</code> is &#x27;no&#x27;, the patch source file is looked up from the module&#x27;s <em>files</em> directory.</div>
                         <div style="font-size: small; color: darkgreen"><br/>aliases: patchfile</div>
                 </td>
             </tr>

docs/ansible.posix.rhel_facts_module.rst

@@ -1,103 +0,0 @@
-.. _ansible.posix.rhel_facts_module:
-
-
-************************
-ansible.posix.rhel_facts
-************************
-
-**Facts module to set or override RHEL specific facts.**
-
-
-Version added: 1.5.0
-
-.. contents::
-   :local:
-   :depth: 1
-
-
-Synopsis
---------
-- Compatibility layer for using the "package" module for rpm-ostree based systems via setting the "pkg_mgr" fact correctly.
-
-
-
-Requirements
-------------
-The below requirements are needed on the host that executes this module.
-
-- rpm-ostree
-
-
-
-
-See Also
---------
-
-.. seealso::
-
-   :ref:`ansible.builtin.package_module`
-      The official documentation on the **ansible.builtin.package** module.
-
-
-Examples
---------
-
-.. code-block:: yaml
-
-    - name: Playbook to use the package module on all RHEL footprints
-      vars:
-        ansible_facts_modules:
-          - setup # REQUIRED to be run before all custom fact modules
-          - ansible.posix.rhel_facts
-      tasks:
-        - name: Ensure packages are installed
-          ansible.builtin.package:
-            name:
-              - htop
-              - ansible
-            state: present
-
-
-Returned Facts
---------------
-Facts returned by this module are added/updated in the ``hostvars`` host facts and can be referenced by name just like any other host fact. They do not need to be registered in order to use them.
-
-.. raw:: html
-
-    <table border=0 cellpadding=0 class="documentation-table">
-                    <tr>
-            <th colspan="1">Fact</th>
-            <th>Returned</th>
-            <th width="100%">Description</th>
-        </tr>
-            <tr>
-                <td colspan="1" colspan="1">
-                    <div class="ansibleOptionAnchor" id="return-"></div>
-                    <b>pkg_mgr</b>
-                    <a class="ansibleOptionLink" href="#return-" title="Permalink to this fact"></a>
-                    <div style="font-size: small">
-                      <span style="color: purple">string</span>
-                    </div>
-                </td>
-                <td>when needed</td>
-                <td>
-                            <div>System-level package manager override
-                            </div>
-                    <br/>
-                        <div style="font-size: smaller"><b>Sample:</b></div>
-                        <div style="font-size: smaller; color: blue; word-wrap: break-word; word-break: break-all;">{&#x27;pkg_mgr&#x27;: &#x27;ansible.posix.rhel_facts&#x27;}</div>
-                </td>
-            </tr>
-    </table>
-    <br/><br/>
-
-
-
-Status
-------
-
-
-Authors
-~~~~~~~
-
-- Adam Miller (@maxamillion)

docs/ansible.posix.rhel_rpm_ostree_module.rst

@@ -1,156 +0,0 @@
-.. _ansible.posix.rhel_rpm_ostree_module:
-
-
-*****************************
-ansible.posix.rhel_rpm_ostree
-*****************************
-
-**Ensure packages exist in a RHEL for Edge rpm-ostree based system**
-
-
-Version added: 1.5.0
-
-.. contents::
-   :local:
-   :depth: 1
-
-
-Synopsis
---------
-- Compatibility layer for using the "package" module for RHEL for Edge systems utilizing the RHEL System Roles.
-
-
-
-Requirements
-------------
-The below requirements are needed on the host that executes this module.
-
-- rpm-ostree
-
-
-Parameters
-----------
-
-.. raw:: html
-
-    <table  border=0 cellpadding=0 class="documentation-table">
-        <tr>
-            <th colspan="1">Parameter</th>
-            <th>Choices/<font color="blue">Defaults</font></th>
-            <th width="100%">Comments</th>
-        </tr>
-            <tr>
-                <td colspan="1">
-                    <div class="ansibleOptionAnchor" id="parameter-"></div>
-                    <b>name</b>
-                    <a class="ansibleOptionLink" href="#parameter-" title="Permalink to this option"></a>
-                    <div style="font-size: small">
-                        <span style="color: purple">list</span>
-                         / <span style="color: purple">elements=string</span>
-                    </div>
-                </td>
-                <td>
-                        <b>Default:</b><br/><div style="color: blue">[]</div>
-                </td>
-                <td>
-                        <div>A package name or package specifier with version, like <code>name-1.0</code>.</div>
-                        <div>Comparison operators for package version are valid here <code>&gt;</code>, <code>&lt;</code>, <code>&gt;=</code>, <code>&lt;=</code>. Example - <code>name&gt;=1.0</code></div>
-                        <div>If a previous version is specified, the task also needs to turn <code>allow_downgrade</code> on. See the <code>allow_downgrade</code> documentation for caveats with downgrading packages.</div>
-                        <div>When using state=latest, this can be <code>&#x27;*&#x27;</code> which means run <code>yum -y update</code>.</div>
-                        <div>You can also pass a url or a local path to a rpm file (using state=present). To operate on several packages this can accept a comma separated string of packages or (as of 2.0) a list of packages.</div>
-                        <div style="font-size: small; color: darkgreen"><br/>aliases: pkg</div>
-                </td>
-            </tr>
-            <tr>
-                <td colspan="1">
-                    <div class="ansibleOptionAnchor" id="parameter-"></div>
-                    <b>state</b>
-                    <a class="ansibleOptionLink" href="#parameter-" title="Permalink to this option"></a>
-                    <div style="font-size: small">
-                        <span style="color: purple">string</span>
-                    </div>
-                </td>
-                <td>
-                        <ul style="margin: 0; padding: 0"><b>Choices:</b>
-                                    <li>absent</li>
-                                    <li>installed</li>
-                                    <li>latest</li>
-                                    <li>present</li>
-                                    <li>removed</li>
-                        </ul>
-                </td>
-                <td>
-                        <div>Whether to install (<code>present</code> or <code>installed</code>, <code>latest</code>), or remove (<code>absent</code> or <code>removed</code>) a package.</div>
-                        <div><code>present</code> and <code>installed</code> will simply ensure that a desired package is installed.</div>
-                        <div><code>latest</code> will update the specified package if it&#x27;s not of the latest available version.</div>
-                        <div><code>absent</code> and <code>removed</code> will remove the specified package.</div>
-                        <div>Default is <code>None</code>, however in effect the default action is <code>present</code> unless the <code>autoremove</code> option is enabled for this module, then <code>absent</code> is inferred.</div>
-                </td>
-            </tr>
-    </table>
-    <br/>
-
-
-Notes
------
-
-.. note::
-   - This module does not support installing or removing packages to/from an overlay as this is not supported by RHEL for Edge, packages needed should be defined in the osbuild Blueprint and provided to Image Builder at build time. This module exists only for ``package`` module compatibility.
-
-
-
-Examples
---------
-
-.. code-block:: yaml
-
-    - name: Ensure htop and ansible are installed on rpm-ostree based RHEL
-      ansible.posix.rhel_rpm_ostree:
-        name:
-          - htop
-          - ansible
-        state: present
-
-
-
-Return Values
--------------
-Common return values are documented `here <https://docs.ansible.com/ansible/latest/reference_appendices/common_return_values.html#common-return-values>`_, the following are the fields unique to this module:
-
-.. raw:: html
-
-    <table border=0 cellpadding=0 class="documentation-table">
-        <tr>
-            <th colspan="1">Key</th>
-            <th>Returned</th>
-            <th width="100%">Description</th>
-        </tr>
-            <tr>
-                <td colspan="1">
-                    <div class="ansibleOptionAnchor" id="return-"></div>
-                    <b>msg</b>
-                    <a class="ansibleOptionLink" href="#return-" title="Permalink to this return value"></a>
-                    <div style="font-size: small">
-                      <span style="color: purple">string</span>
-                    </div>
-                </td>
-                <td>always</td>
-                <td>
-                            <div>status of rpm transaction</div>
-                    <br/>
-                        <div style="font-size: smaller"><b>Sample:</b></div>
-                        <div style="font-size: smaller; color: blue; word-wrap: break-word; word-break: break-all;">No changes made.</div>
-                </td>
-            </tr>
-    </table>
-    <br/><br/>
-
-
-Status
-------
-
-
-Authors
-~~~~~~~
-
-- Adam Miller (@maxamillion)

docs/ansible.posix.rpm_ostree_upgrade_module.rst

@@ -1,175 +0,0 @@
-.. _ansible.posix.rpm_ostree_upgrade_module:
-
-
-********************************
-ansible.posix.rpm_ostree_upgrade
-********************************
-
-**Manage rpm-ostree upgrade transactions**
-
-
-Version added: 1.5.0
-
-.. contents::
-   :local:
-   :depth: 1
-
-
-Synopsis
---------
-- Manage an rpm-ostree upgrade transactions.
-
-
-
-Requirements
-------------
-The below requirements are needed on the host that executes this module.
-
-- rpm-ostree
-
-
-Parameters
-----------
-
-.. raw:: html
-
-    <table  border=0 cellpadding=0 class="documentation-table">
-        <tr>
-            <th colspan="1">Parameter</th>
-            <th>Choices/<font color="blue">Defaults</font></th>
-            <th width="100%">Comments</th>
-        </tr>
-            <tr>
-                <td colspan="1">
-                    <div class="ansibleOptionAnchor" id="parameter-"></div>
-                    <b>allow_downgrade</b>
-                    <a class="ansibleOptionLink" href="#parameter-" title="Permalink to this option"></a>
-                    <div style="font-size: small">
-                        <span style="color: purple">boolean</span>
-                    </div>
-                </td>
-                <td>
-                        <ul style="margin: 0; padding: 0"><b>Choices:</b>
-                                    <li><div style="color: blue"><b>no</b>&nbsp;&larr;</div></li>
-                                    <li>yes</li>
-                        </ul>
-                </td>
-                <td>
-                        <div>Allow for the upgrade to be a chronologically older tree.</div>
-                </td>
-            </tr>
-            <tr>
-                <td colspan="1">
-                    <div class="ansibleOptionAnchor" id="parameter-"></div>
-                    <b>cache_only</b>
-                    <a class="ansibleOptionLink" href="#parameter-" title="Permalink to this option"></a>
-                    <div style="font-size: small">
-                        <span style="color: purple">boolean</span>
-                    </div>
-                </td>
-                <td>
-                        <ul style="margin: 0; padding: 0"><b>Choices:</b>
-                                    <li><div style="color: blue"><b>no</b>&nbsp;&larr;</div></li>
-                                    <li>yes</li>
-                        </ul>
-                </td>
-                <td>
-                        <div>Perform the transaction using only pre-cached data, do not download.</div>
-                </td>
-            </tr>
-            <tr>
-                <td colspan="1">
-                    <div class="ansibleOptionAnchor" id="parameter-"></div>
-                    <b>os</b>
-                    <a class="ansibleOptionLink" href="#parameter-" title="Permalink to this option"></a>
-                    <div style="font-size: small">
-                        <span style="color: purple">string</span>
-                    </div>
-                </td>
-                <td>
-                        <b>Default:</b><br/><div style="color: blue">""</div>
-                </td>
-                <td>
-                        <div>The OSNAME upon which to operate.</div>
-                </td>
-            </tr>
-            <tr>
-                <td colspan="1">
-                    <div class="ansibleOptionAnchor" id="parameter-"></div>
-                    <b>peer</b>
-                    <a class="ansibleOptionLink" href="#parameter-" title="Permalink to this option"></a>
-                    <div style="font-size: small">
-                        <span style="color: purple">boolean</span>
-                    </div>
-                </td>
-                <td>
-                        <ul style="margin: 0; padding: 0"><b>Choices:</b>
-                                    <li><div style="color: blue"><b>no</b>&nbsp;&larr;</div></li>
-                                    <li>yes</li>
-                        </ul>
-                </td>
-                <td>
-                        <div>Force peer-to-peer connection instead of using a system message bus.</div>
-                </td>
-            </tr>
-    </table>
-    <br/>
-
-
-
-
-Examples
---------
-
-.. code-block:: yaml
-
-    - name: Upgrade the rpm-ostree image without options, accept all defaults
-      ansible.posix.rpm_ostree_upgrade:
-
-    - name: Upgrade the rpm-ostree image allowing downgrades
-      ansible.posix.rpm_ostree_upgrade:
-        allow_downgrade: true
-
-
-
-Return Values
--------------
-Common return values are documented `here <https://docs.ansible.com/ansible/latest/reference_appendices/common_return_values.html#common-return-values>`_, the following are the fields unique to this module:
-
-.. raw:: html
-
-    <table border=0 cellpadding=0 class="documentation-table">
-        <tr>
-            <th colspan="1">Key</th>
-            <th>Returned</th>
-            <th width="100%">Description</th>
-        </tr>
-            <tr>
-                <td colspan="1">
-                    <div class="ansibleOptionAnchor" id="return-"></div>
-                    <b>msg</b>
-                    <a class="ansibleOptionLink" href="#return-" title="Permalink to this return value"></a>
-                    <div style="font-size: small">
-                      <span style="color: purple">string</span>
-                    </div>
-                </td>
-                <td>always</td>
-                <td>
-                            <div>The command standard output</div>
-                    <br/>
-                        <div style="font-size: smaller"><b>Sample:</b></div>
-                        <div style="font-size: smaller; color: blue; word-wrap: break-word; word-break: break-all;">No upgrade available.</div>
-                </td>
-            </tr>
-    </table>
-    <br/><br/>
-
-
-Status
-------
-
-
-Authors
-~~~~~~~
-
-- Adam Miller (@maxamillion)

docs/ansible.posix.seboolean_module.rst

@@ -92,7 +92,7 @@ Parameters
                         </ul>
                 </td>
                 <td>
-                        <div>Set to <code>true</code> if the boolean setting should survive a reboot.</div>
+                        <div>Set to <code>yes</code> if the boolean setting should survive a reboot.</div>
                 </td>
             </tr>
             <tr>
@@ -135,8 +135,8 @@ Examples
     - name: Set httpd_can_network_connect flag on and keep it persistent across reboots
       ansible.posix.seboolean:
         name: httpd_can_network_connect
-        state: true
-        persistent: true
+        state: yes
+        persistent: yes
 
 
 

docs/ansible.posix.synchronize_module.rst

@@ -150,7 +150,7 @@ Parameters
                 </td>
                 <td>
                         <div>Delete files in <em>dest</em> that do not exist (after transfer, not before) in the <em>src</em> path.</div>
-                        <div>This option requires <em>recursive=true</em>.</div>
+                        <div>This option requires <em>recursive=yes</em>.</div>
                         <div>This option ignores excluded files and behaves like the rsync opt <code>--delete-after</code>.</div>
                 </td>
             </tr>
@@ -465,7 +465,7 @@ Parameters
                 </td>
                 <td>
                         <div>Put user@ for the remote paths.</div>
-                        <div>If you have a custom ssh config to define the remote user for a host that does not match the inventory user, you should set this parameter to <code>false</code>.</div>
+                        <div>If you have a custom ssh config to define the remote user for a host that does not match the inventory user, you should set this parameter to <code>no</code>.</div>
                 </td>
             </tr>
             <tr>
@@ -502,8 +502,8 @@ Parameters
                 </td>
                 <td>
                         <div>SSH connection multiplexing for rsync is disabled by default to prevent misconfigured ControlSockets from resulting in failed SSH connections. This is accomplished by setting the SSH <code>ControlSocket</code> to <code>none</code>.</div>
-                        <div>Set this option to <code>true</code> to allow multiplexing and reduce SSH connection overhead.</div>
-                        <div>Note that simply setting this option to <code>true</code> is not enough; You must also configure SSH connection multiplexing in your SSH client config by setting values for <code>ControlMaster</code>, <code>ControlPersist</code> and <code>ControlPath</code>.</div>
+                        <div>Set this option to <code>yes</code> to allow multiplexing and reduce SSH connection overhead.</div>
+                        <div>Note that simply setting this option to <code>yes</code> is not enough; You must also configure SSH connection multiplexing in your SSH client config by setting values for <code>ControlMaster</code>, <code>ControlPersist</code> and <code>ControlPath</code>.</div>
                 </td>
             </tr>
             <tr>
@@ -595,8 +595,8 @@ See Also
 
 .. seealso::
 
-   :ref:`ansible.builtin.copy_module`
-      The official documentation on the **ansible.builtin.copy** module.
+   :ref:`copy_module`
+      The official documentation on the **copy** module.
    :ref:`community.windows.win_robocopy_module`
       The official documentation on the **community.windows.win_robocopy** module.
 
@@ -639,27 +639,27 @@ Examples
       ansible.posix.synchronize:
         src: some/relative/path
         dest: /some/absolute/path
-        archive: false
+        archive: no
 
     - name: Synchronization with --archive options enabled except for --recursive
       ansible.posix.synchronize:
         src: some/relative/path
         dest: /some/absolute/path
-        recursive: false
+        recursive: no
 
     - name: Synchronization with --archive options enabled except for --times, with --checksum option enabled
       ansible.posix.synchronize:
         src: some/relative/path
         dest: /some/absolute/path
-        checksum: true
-        times: false
+        checksum: yes
+        times: no
 
     - name: Synchronization without --archive options enabled except use --links
       ansible.posix.synchronize:
         src: some/relative/path
         dest: /some/absolute/path
-        archive: false
-        links: true
+        archive: no
+        links: yes
 
     - name: Synchronization of two paths both on the control machine
       ansible.posix.synchronize:
@@ -689,8 +689,8 @@ Examples
       ansible.posix.synchronize:
         src: some/relative/path
         dest: /some/absolute/path
-        delete: true
-        recursive: true
+        delete: yes
+        recursive: yes
 
     # This specific command is granted su privileges on the destination
     - name: Synchronize using an alternate rsync command

docs/ansible.posix.sysctl_module.rst

@@ -85,7 +85,7 @@ Parameters
                         </ul>
                 </td>
                 <td>
-                        <div>If <code>true</code>, performs a <em>/sbin/sysctl -p</em> if the <code>sysctl_file</code> is updated. If <code>false</code>, does not reload <em>sysctl</em> even if the <code>sysctl_file</code> is updated.</div>
+                        <div>If <code>yes</code>, performs a <em>/sbin/sysctl -p</em> if the <code>sysctl_file</code> is updated. If <code>no</code>, does not reload <em>sysctl</em> even if the <code>sysctl_file</code> is updated.</div>
                 </td>
             </tr>
             <tr>
@@ -139,7 +139,7 @@ Parameters
                         </ul>
                 </td>
                 <td>
-                        <div>Verify token value with the sysctl command and set with -w if necessary.</div>
+                        <div>Verify token value with the sysctl command and set with -w if necessary</div>
                 </td>
             </tr>
             <tr>
@@ -186,21 +186,21 @@ Examples
         name: kernel.panic
         value: '3'
         sysctl_file: /tmp/test_sysctl.conf
-        reload: false
+        reload: no
 
     # Set ip forwarding on in /proc and verify token value with the sysctl command
     - ansible.posix.sysctl:
         name: net.ipv4.ip_forward
         value: '1'
-        sysctl_set: true
+        sysctl_set: yes
 
     # Set ip forwarding on in /proc and in the sysctl file and reload if necessary
     - ansible.posix.sysctl:
         name: net.ipv4.ip_forward
         value: '1'
-        sysctl_set: true
+        sysctl_set: yes
         state: present
-        reload: true
+        reload: yes
 
 
 

galaxy.yml

@@ -1,6 +1,6 @@
 namespace: ansible
 name: posix
-version: 1.5.4
+version: 1.5.0
 readme: README.md
 authors:
   - Ansible (github.com/ansible)

plugins/action/synchronize.py

@@ -225,6 +225,7 @@ class ActionModule(ActionBase):
 
         # Parameter name needed by the ansible module
         _tmp_args['_local_rsync_path'] = task_vars.get('ansible_rsync_path') or 'rsync'
+        _tmp_args['_local_rsync_password'] = task_vars.get('ansible_ssh_pass') or task_vars.get('ansible_password')
 
         # rsync thinks that one end of the connection is localhost and the
         # other is the host we're running the task for  (Note: We use
@@ -332,9 +333,8 @@ class ActionModule(ActionBase):
         if src is None or dest is None:
             return dict(failed=True, msg="synchronize requires both src and dest parameters are set")
 
-        # Determine if we need a user@ and a password
+        # Determine if we need a user@
         user = None
-        password = task_vars.get('ansible_ssh_pass', None) or task_vars.get('ansible_password', None)
         if not dest_is_local:
             # Src and dest rsync "path" handling
             if boolean(_tmp_args.get('set_remote_user', 'yes'), strict=False):
@@ -344,12 +344,10 @@ class ActionModule(ActionBase):
                         user = task_vars.get('ansible_user') or self._play_context.remote_user
                     if not user:
                         user = C.DEFAULT_REMOTE_USER
+
                 else:
                     user = task_vars.get('ansible_user') or self._play_context.remote_user
 
-            if self._templar is not None:
-                user = self._templar.template(user)
-
             # Private key handling
             # Use the private_key parameter if passed else use context private_key_file
             _tmp_args['private_key'] = _tmp_args.get('private_key', self._play_context.private_key_file)
@@ -363,17 +361,12 @@ class ActionModule(ActionBase):
                 # src is a local path, dest is a remote path: <user>@<host>
                 src = self._process_origin(src_host, src, user)
                 dest = self._process_remote(_tmp_args, dest_host, dest, user, inv_port in localhost_ports)
-
-            password = dest_host_inventory_vars.get('ansible_ssh_pass', None) or dest_host_inventory_vars.get('ansible_password', None)
-            if self._templar is not None:
-                password = self._templar.template(password)
         else:
             # Still need to munge paths (to account for roles) even if we aren't
             # copying files between hosts
             src = self._get_absolute_path(path=src)
             dest = self._get_absolute_path(path=dest)
 
-        _tmp_args['_local_rsync_password'] = password
         _tmp_args['src'] = src
         _tmp_args['dest'] = dest
 

plugins/callback/json.py

@@ -25,16 +25,6 @@ DOCUMENTATION = '''
           - key: show_custom_stats
             section: defaults
         type: bool
-      json_indent:
-        name: Use indenting for the JSON output
-        description: 'If specified, use this many spaces for indenting in the JSON output. If <= 0, write to a single line.'
-        default: 4
-        env:
-          - name: ANSIBLE_JSON_INDENT
-        ini:
-          - key: json_indent
-            section: defaults
-        type: integer
     notes:
       - When using a strategy such as free, host_pinned, or a custom strategy, host results will
         be added to new task results in ``.plays[].tasks[]``. As such, there will exist duplicate
@@ -71,19 +61,12 @@ class CallbackModule(CallbackBase):
         self._task_map = {}
         self._is_lockstep = False
 
-        self.set_options()
-
-        self._json_indent = self.get_option('json_indent')
-        if self._json_indent <= 0:
-            self._json_indent = None
-
     def _new_play(self, play):
         self._is_lockstep = play.strategy in LOCKSTEP_CALLBACKS
         return {
             'play': {
                 'name': play.get_name(),
                 'id': to_text(play._uuid),
-                'path': to_text(play.get_path()),
                 'duration': {
                     'start': current_time()
                 }
@@ -96,7 +79,6 @@ class CallbackModule(CallbackBase):
             'task': {
                 'name': task.get_name(),
                 'id': to_text(task._uuid),
-                'path': to_text(task.get_path()),
                 'duration': {
                     'start': current_time()
                 }
@@ -161,7 +143,7 @@ class CallbackModule(CallbackBase):
             'global_custom_stats': global_custom_stats,
         }
 
-        self._display.display(json.dumps(output, cls=AnsibleJSONEncoder, indent=self._json_indent, sort_keys=True))
+        self._display.display(json.dumps(output, cls=AnsibleJSONEncoder, indent=4, sort_keys=True))
 
     def _record_task_result(self, on_info, result, **kwargs):
         """This function is used as a partial to add failed/skipped info in a single method"""

plugins/callback/jsonl.py

@@ -1,214 +0,0 @@
-# (c) 2016, Matt Martz <matt@sivel.net>
-# (c) 2017 Ansible Project
-# GNU General Public License v3.0+ (see COPYING or https://www.gnu.org/licenses/gpl-3.0.txt)
-
-# Make coding more python3-ish
-from __future__ import (absolute_import, division, print_function)
-__metaclass__ = type
-
-DOCUMENTATION = '''
-    name: jsonl
-    short_description: Ansible screen output as JSONL (lines in json format)
-    description:
-        - This callback converts all events into JSON output to stdout
-        - This callback in contrast with ansible.posix.json uses less memory, because it doesn't store results.
-    type: stdout
-    requirements:
-      - Set as stdout in config
-    options:
-      show_custom_stats:
-        name: Show custom stats
-        description: 'This adds the custom stats set via the set_stats plugin to the play recap'
-        default: False
-        env:
-          - name: ANSIBLE_SHOW_CUSTOM_STATS
-        ini:
-          - key: show_custom_stats
-            section: defaults
-        type: bool
-      json_indent:
-        name: Use indenting for the JSON output
-        description: 'If specified, use this many spaces for indenting in the JSON output. If not specified or <= 0, write to a single line.'
-        default: 0
-        env:
-          - name: ANSIBLE_JSON_INDENT
-        ini:
-          - key: json_indent
-            section: defaults
-        type: integer
-    notes:
-      - When using a strategy such as free, host_pinned, or a custom strategy, host results will
-        be added to new task results in ``.plays[].tasks[]``. As such, there will exist duplicate
-        task objects indicated by duplicate task IDs at ``.plays[].tasks[].task.id``, each with an
-        individual host result for the task.
-'''
-
-import datetime
-import json
-import copy
-
-from functools import partial
-
-from ansible.inventory.host import Host
-from ansible.module_utils._text import to_text
-from ansible.parsing.ajson import AnsibleJSONEncoder
-from ansible.plugins.callback import CallbackBase
-
-
-LOCKSTEP_CALLBACKS = frozenset(('linear', 'debug'))
-
-
-def current_time():
-    return '%sZ' % datetime.datetime.utcnow().isoformat()
-
-
-class CallbackModule(CallbackBase):
-    CALLBACK_VERSION = 2.0
-    CALLBACK_TYPE = 'stdout'
-    CALLBACK_NAME = 'ansible.posix.jsonl'
-
-    def __init__(self, display=None):
-        super(CallbackModule, self).__init__(display)
-        self.results = []
-        self._task_map = {}
-        self._is_lockstep = False
-
-        self.set_options()
-
-        self._json_indent = self.get_option('json_indent')
-        if self._json_indent <= 0:
-            self._json_indent = None
-
-    def _new_play(self, play):
-        self._is_lockstep = play.strategy in LOCKSTEP_CALLBACKS
-        return {
-            'play': {
-                'name': play.get_name(),
-                'id': to_text(play._uuid),
-                'path': to_text(play.get_path()),
-                'duration': {
-                    'start': current_time()
-                }
-            },
-            'tasks': []
-        }
-
-    def _new_task(self, task):
-        return {
-            'task': {
-                'name': task.get_name(),
-                'id': to_text(task._uuid),
-                'path': to_text(task.get_path()),
-                'duration': {
-                    'start': current_time()
-                }
-            },
-            'hosts': {}
-        }
-
-    def _find_result_task(self, host, task):
-        key = (host.get_name(), task._uuid)
-        return self._task_map.get(
-            key,
-            self.results[-1]['tasks'][-1]
-        )
-
-    def v2_playbook_on_play_start(self, play):
-        play_result = self._new_play(play)
-        self.results.append(play_result)
-        self._write_event('v2_playbook_on_play_start', play_result)
-
-    def v2_runner_on_start(self, host, task):
-        if self._is_lockstep:
-            return
-        key = (host.get_name(), task._uuid)
-        task_result = self._new_task(task)
-        self._task_map[key] = task_result
-        self.results[-1]['tasks'].append(task_result)
-        self._write_event('v2_runner_on_start', task_result)
-
-    def v2_playbook_on_task_start(self, task, is_conditional):
-        if not self._is_lockstep:
-            return
-        task_result = self._new_task(task)
-        self.results[-1]['tasks'].append(task_result)
-        self._write_event('v2_playbook_on_task_start', task_result)
-
-    def v2_playbook_on_handler_task_start(self, task):
-        if not self._is_lockstep:
-            return
-        task_result = self._new_task(task)
-        self.results[-1]['tasks'].append(task_result)
-        self._write_event('v2_playbook_on_handler_task_start', task_result)
-
-    def _convert_host_to_name(self, key):
-        if isinstance(key, (Host,)):
-            return key.get_name()
-        return key
-
-    def v2_playbook_on_stats(self, stats):
-        """Display info about playbook statistics"""
-
-        hosts = sorted(stats.processed.keys())
-
-        summary = {}
-        for h in hosts:
-            s = stats.summarize(h)
-            summary[h] = s
-
-        custom_stats = {}
-        global_custom_stats = {}
-
-        if self.get_option('show_custom_stats') and stats.custom:
-            custom_stats.update(dict((self._convert_host_to_name(k), v) for k, v in stats.custom.items()))
-            global_custom_stats.update(custom_stats.pop('_run', {}))
-
-        output = {
-            'stats': summary,
-            'custom_stats': custom_stats,
-            'global_custom_stats': global_custom_stats,
-        }
-
-        self._write_event('v2_playbook_on_stats', output)
-
-    def _write_event(self, event_name, output):
-        output['_event'] = event_name
-        output['_timestamp'] = current_time()
-        self._display.display(json.dumps(output, cls=AnsibleJSONEncoder, indent=self._json_indent, separators=',:', sort_keys=True))
-
-    def _record_task_result(self, event_name, on_info, result, **kwargs):
-        """This function is used as a partial to add failed/skipped info in a single method"""
-        host = result._host
-        task = result._task
-
-        result_copy = result._result.copy()
-        result_copy.update(on_info)
-        result_copy['action'] = task.action
-
-        task_result = self._find_result_task(host, task)
-
-        end_time = current_time()
-        task_result['task']['duration']['end'] = end_time
-        self.results[-1]['play']['duration']['end'] = end_time
-
-        task_result_copy = copy.deepcopy(task_result)
-        task_result_copy['hosts'][host.name] = result_copy
-
-        if not self._is_lockstep:
-            key = (host.get_name(), task._uuid)
-            del self._task_map[key]
-
-        self._write_event(event_name, task_result_copy)
-
-    def __getattribute__(self, name):
-        """Return ``_record_task_result`` partial with a dict containing skipped/failed if necessary"""
-        if name not in ('v2_runner_on_ok', 'v2_runner_on_failed', 'v2_runner_on_unreachable', 'v2_runner_on_skipped'):
-            return object.__getattribute__(self, name)
-
-        on = name.rsplit('_', 1)[1]
-
-        on_info = {}
-        if on in ('failed', 'skipped'):
-            on_info[on] = True
-
-        return partial(self._record_task_result, name, on_info)

plugins/callback/profile_roles.py

@@ -102,8 +102,8 @@ class CallbackModule(CallbackBase):
         self._display.display(tasktime())
 
     def playbook_on_stats(self, stats):
-        self._display.display(tasktime())
-        self._display.display(filled("", fchar="="))
+        # Align summary report header with other callback plugin summary
+        self._display.banner("ROLE RECAP")
 
         timestamp(self)
         total_time = sum(self.totals.values())
@@ -116,3 +116,4 @@ class CallbackModule(CallbackBase):
         msg_total = u"{0:-<70}{1:->9}".format(u'total ', u' {0:.02f}s'.format(total_time))
         self._display.display(filled("", fchar="~"))
         self._display.display(msg_total)
+        

plugins/callback/profile_tasks.py

@@ -17,7 +17,7 @@ DOCUMENTATION = '''
       - Ansible callback plugin for timing individual tasks and overall execution time.
       - "Mashup of 2 excellent original works: https://github.com/jlafon/ansible-profile,
          https://github.com/junaid18183/ansible_home/blob/master/ansible_plugins/callback_plugins/timestamp.py.old"
-      - "Format: C(<task start timestamp>) C(<length of previous task>) C(<current elapsed playbook execution time>)"
+      - "Format: C(<task start timestamp> (<length of previous task>) <current elapsed playbook execution time>)"
       - It also lists the top/bottom time consuming tasks in the summary (configurable)
       - Before 2.4 only the environment variables were available for configuration.
     requirements:
@@ -174,8 +174,8 @@ class CallbackModule(CallbackBase):
         self._display.display(tasktime())
 
     def playbook_on_stats(self, stats):
-        self._display.display(tasktime())
-        self._display.display(filled("", fchar="="))
+        # Align summary report header with other callback plugin summary
+        self._display.banner("TASKS RECAP")
 
         timestamp(self)
         self.current = None
@@ -199,3 +199,4 @@ class CallbackModule(CallbackBase):
             if 'path' in result:
                 msg += u"\n{0:-<{1}}".format(result['path'] + u' ', self._display.columns)
             self._display.display(msg)
+            

plugins/callback/timer.py

@@ -46,4 +46,6 @@ class CallbackModule(CallbackBase):
     def v2_playbook_on_stats(self, stats):
         end_time = datetime.utcnow()
         runtime = end_time - self.start_time
-        self._display.display("Playbook run took %s days, %s hours, %s minutes, %s seconds" % (self.days_hours_minutes_seconds(runtime)))
+        # Align summary report header with other callback plugin summary
+        self._display.banner("PLAYBOOK RECAP")
+        self._display.display("Playbook run took %s days, %s hours, %s minutes, %s seconds\n\r" % (self.days_hours_minutes_seconds(runtime)))

plugins/module_utils/version.py

@@ -16,5 +16,3 @@ __metaclass__ = type
 #     from ansible.module_utils.compat.version import LooseVersion
 
 from ._version import LooseVersion, StrictVersion
-
-__all__ = ['LooseVersion', 'StrictVersion']

plugins/modules/acl.py

@@ -20,7 +20,7 @@ options:
     description:
     - The full path of the file or object.
     type: path
-    required: true
+    required: yes
     aliases: [ name ]
   state:
     description:
@@ -33,18 +33,17 @@ options:
     description:
     - Whether to follow symlinks on the path if a symlink is encountered.
     type: bool
-    default: true
+    default: yes
   default:
     description:
-    - If the target is a directory, setting this to C(true) will make it the default ACL for entities created inside the directory.
-    - Setting C(default) to C(true) causes an error if the path is a file.
+    - If the target is a directory, setting this to C(yes) will make it the default ACL for entities created inside the directory.
+    - Setting C(default) to C(yes) causes an error if the path is a file.
     type: bool
-    default: false
+    default: no
   entity:
     description:
     - The actual user or group that the ACL applies to when matching entity types user or group are selected.
     type: str
-    default: ""
   etype:
     description:
     - The entity type of the ACL to apply, see C(setfacl) documentation for more info.
@@ -70,13 +69,13 @@ options:
     - Incompatible with C(state=query).
     - Alias C(recurse) added in version 1.3.0.
     type: bool
-    default: false
+    default: no
     aliases: [ recurse ]
   use_nfsv4_acls:
     description:
     - Use NFSv4 ACLs instead of POSIX ACLs.
     type: bool
-    default: false
+    default: no
   recalculate_mask:
     description:
     - Select if and when to recalculate the effective right masks of the files.
@@ -116,7 +115,7 @@ EXAMPLES = r'''
     entity: joe
     etype: user
     permissions: rw
-    default: true
+    default: yes
     state: present
 
 - name: Same as previous but using entry shorthand

plugins/modules/at.py

@@ -44,7 +44,7 @@ options:
     description:
      - If a matching job is present a new job will not be added.
     type: bool
-    default: false
+    default: no
 requirements:
  - at
 author:
@@ -68,7 +68,7 @@ EXAMPLES = r'''
     command: ls -d / >/dev/null
     count: 20
     units: minutes
-    unique: true
+    unique: yes
 '''
 
 import os

plugins/modules/authorized_key.py

@@ -34,13 +34,13 @@ options:
   manage_dir:
     description:
       - Whether this module should manage the directory of the authorized key file.
-      - If set to C(true), the module will create the directory, as well as set the owner and permissions
+      - If set to C(yes), the module will create the directory, as well as set the owner and permissions
         of an existing directory.
-      - Be sure to set C(manage_dir=false) if you are using an alternate directory for authorized_keys,
+      - Be sure to set C(manage_dir=no) if you are using an alternate directory for authorized_keys,
         as set with C(path), since you could lock yourself out of SSH access.
       - See the example below.
     type: bool
-    default: true
+    default: yes
   state:
     description:
       - Whether the given key (with the given key_options) should or should not be in the file.
@@ -58,15 +58,15 @@ options:
       - This option is not loop aware, so if you use C(with_) , it will be exclusive per iteration of the loop.
       - If you want multiple keys in the file you need to pass them all to C(key) in a single batch as mentioned above.
     type: bool
-    default: false
+    default: no
   validate_certs:
     description:
       - This only applies if using a https url as the source of the keys.
-      - If set to C(false), the SSL certificates will not be validated.
-      - This should only set to C(false) used on personally controlled sites using self-signed certificates as it avoids verifying the source site.
-      - Prior to 2.1 the code worked as if this was set to C(true).
+      - If set to C(no), the SSL certificates will not be validated.
+      - This should only set to C(no) used on personally controlled sites using self-signed certificates as it avoids verifying the source site.
+      - Prior to 2.1 the code worked as if this was set to C(yes).
     type: bool
-    default: true
+    default: yes
   comment:
     description:
       - Change the comment on the public key.
@@ -77,7 +77,7 @@ options:
     description:
       - Follow path symlink instead of replacing it.
     type: bool
-    default: false
+    default: no
 author: Ansible Core Team
 '''
 
@@ -106,7 +106,7 @@ EXAMPLES = r'''
     state: present
     key: "{{ lookup('file', '/home/charlie/.ssh/id_rsa.pub') }}"
     path: /etc/ssh/authorized_keys/charlie
-    manage_dir: false
+    manage_dir: False
 
 - name: Set up multiple authorized keys
   ansible.posix.authorized_key:
@@ -129,14 +129,14 @@ EXAMPLES = r'''
     user: charlie
     state: present
     key: https://github.com/user.keys
-    validate_certs: false
+    validate_certs: False
 
 - name: Set authorized key, removing all the authorized keys already set
   ansible.posix.authorized_key:
     user: root
     key: "{{ lookup('file', 'public_keys/doe-jane') }}"
     state: present
-    exclusive: true
+    exclusive: True
 
 - name: Set authorized key for user ubuntu copying it from current user
   ansible.posix.authorized_key:
@@ -150,7 +150,7 @@ exclusive:
   description: If the key has been forced to be exclusive or not.
   returned: success
   type: bool
-  sample: false
+  sample: False
 key:
   description: The key that the module was running against.
   returned: success
@@ -170,7 +170,7 @@ manage_dir:
   description: Whether this module managed the directory of the authorized key file.
   returned: success
   type: bool
-  sample: true
+  sample: True
 path:
   description: Alternate path to the authorized_keys file
   returned: success
@@ -192,7 +192,7 @@ user:
   type: str
   sample: user
 validate_certs:
-  description: This only applies if using a https url as the source of the keys. If set to C(false), the SSL certificates will not be validated.
+  description: This only applies if using a https url as the source of the keys. If set to C(no), the SSL certificates will not be validated.
   returned: success
   type: bool
   sample: true

plugins/modules/firewalld.py

@@ -19,10 +19,6 @@ options:
       - Name of a service to add/remove to/from firewalld.
       - The service must be listed in output of firewall-cmd --get-services.
     type: str
-  protocol:
-    description:
-      - Name of a protocol to add/remove to/from firewalld.
-    type: str
   port:
     description:
       - Name of a port or port range to add/remove to/from firewalld.
@@ -86,13 +82,13 @@ options:
     description:
       - Should this configuration be in the running firewalld configuration or persist across reboots.
       - As of Ansible 2.3, permanent operations can operate on firewalld configs when it is not running (requires firewalld >= 0.3.9).
-      - Note that if this is C(false), immediate is assumed C(true).
+      - Note that if this is C(no), immediate is assumed C(yes).
     type: bool
   immediate:
     description:
       - Should this configuration be applied immediately, if set as permanent.
     type: bool
-    default: false
+    default: no
   state:
     description:
       - Enable or disable a setting.
@@ -145,35 +141,29 @@ EXAMPLES = r'''
 - name: permit traffic in default zone for https service
   ansible.posix.firewalld:
     service: https
-    permanent: true
-    state: enabled
-
-- name: permit ospf traffic
-  ansible.posix.firewalld:
-    protocol: ospf
-    permanent: true
+    permanent: yes
     state: enabled
 
 - name: do not permit traffic in default zone on port 8081/tcp
   ansible.posix.firewalld:
     port: 8081/tcp
-    permanent: true
+    permanent: yes
     state: disabled
 
 - ansible.posix.firewalld:
     port: 161-162/udp
-    permanent: true
+    permanent: yes
     state: enabled
 
 - ansible.posix.firewalld:
     zone: dmz
     service: http
-    permanent: true
+    permanent: yes
     state: enabled
 
 - ansible.posix.firewalld:
     rich_rule: rule service name="ftp" audit limit value="1/m" accept
-    permanent: true
+    permanent: yes
     state: enabled
 
 - ansible.posix.firewalld:
@@ -184,44 +174,44 @@ EXAMPLES = r'''
 - ansible.posix.firewalld:
     zone: trusted
     interface: eth2
-    permanent: true
+    permanent: yes
     state: enabled
 
 - ansible.posix.firewalld:
-    masquerade: true
+    masquerade: yes
     state: enabled
-    permanent: true
+    permanent: yes
     zone: dmz
 
 - ansible.posix.firewalld:
     zone: custom
     state: present
-    permanent: true
+    permanent: yes
 
 - ansible.posix.firewalld:
     zone: drop
     state: enabled
-    permanent: true
-    icmp_block_inversion: true
+    permanent: yes
+    icmp_block_inversion: yes
 
 - ansible.posix.firewalld:
     zone: drop
     state: enabled
-    permanent: true
+    permanent: yes
     icmp_block: echo-request
 
 - ansible.posix.firewalld:
     zone: internal
     state: present
-    permanent: true
+    permanent: yes
     target: ACCEPT
 
 - name: Redirect port 443 to 8443 with Rich Rule
   ansible.posix.firewalld:
     rich_rule: rule family=ipv4 forward-port port=443 protocol=tcp to-port=8443
     zone: public
-    permanent: true
-    immediate: true
+    permanent: yes
+    immediate: yes
     state: enabled
 '''
 
@@ -353,47 +343,6 @@ class ServiceTransaction(FirewallTransaction):
         self.update_fw_settings(fw_zone, fw_settings)
 
 
-class ProtocolTransaction(FirewallTransaction):
-    """
-    ProtocolTransaction
-    """
-
-    def __init__(self, module, action_args=None, zone=None, desired_state=None, permanent=False, immediate=False):
-        super(ProtocolTransaction, self).__init__(
-            module, action_args=action_args, desired_state=desired_state, zone=zone, permanent=permanent, immediate=immediate
-        )
-
-    def get_enabled_immediate(self, protocol, timeout):
-        if protocol in self.fw.getProtocols(self.zone):
-            return True
-        else:
-            return False
-
-    def get_enabled_permanent(self, protocol, timeout):
-        fw_zone, fw_settings = self.get_fw_zone_settings()
-
-        if protocol in fw_settings.getProtocols():
-            return True
-        else:
-            return False
-
-    def set_enabled_immediate(self, protocol, timeout):
-        self.fw.addProtocol(self.zone, protocol, timeout)
-
-    def set_enabled_permanent(self, protocol, timeout):
-        fw_zone, fw_settings = self.get_fw_zone_settings()
-        fw_settings.addProtocol(protocol)
-        self.update_fw_settings(fw_zone, fw_settings)
-
-    def set_disabled_immediate(self, protocol, timeout):
-        self.fw.removeProtocol(self.zone, protocol)
-
-    def set_disabled_permanent(self, protocol, timeout):
-        fw_zone, fw_settings = self.get_fw_zone_settings()
-        fw_settings.removeProtocol(protocol)
-        self.update_fw_settings(fw_zone, fw_settings)
-
-
 class MasqueradeTransaction(FirewallTransaction):
     """
     MasqueradeTransaction
@@ -520,7 +469,6 @@ class InterfaceTransaction(FirewallTransaction):
                 old_zone_obj = self.fw.config.get_zone(zone)
                 if interface in old_zone_obj.interfaces:
                     iface_zone_objs.append(old_zone_obj)
-
             if len(iface_zone_objs) > 1:
                 # Even it shouldn't happen, it's actually possible that
                 # the same interface is in several zone XML files
@@ -530,10 +478,11 @@ class InterfaceTransaction(FirewallTransaction):
                         len(iface_zone_objs)
                     )
                 )
-            elif len(iface_zone_objs) == 1 and iface_zone_objs[0].name != self.zone:
             old_zone_obj = iface_zone_objs[0]
-                old_zone_config = self.fw.config.get_zone_config(old_zone_obj)
-                old_zone_settings = FirewallClientZoneSettings(list(old_zone_config))
+            if old_zone_obj.name != self.zone:
+                old_zone_settings = FirewallClientZoneSettings(
+                    self.fw.config.get_zone_config(old_zone_obj)
+                )
                 old_zone_settings.removeInterface(interface)    # remove from old
                 self.fw.config.set_zone_config(
                     old_zone_obj,
@@ -726,31 +675,23 @@ class ZoneTransaction(FirewallTransaction):
         self.module.fail_json(msg=self.tx_not_permanent_error_msg)
 
     def get_enabled_permanent(self):
-        if self.fw_offline:
-            zones = self.fw.config.get_zones()
-            zone_names = [self.fw.config.get_zone(z).name for z in zones]
-        else:
         zones = self.fw.config().listZones()
         zone_names = [self.fw.config().getZone(z).get_property("name") for z in zones]
-        return self.zone in zone_names
+        if self.zone in zone_names:
+            return True
+        else:
+            return False
 
     def set_enabled_immediate(self):
         self.module.fail_json(msg=self.tx_not_permanent_error_msg)
 
     def set_enabled_permanent(self):
-        if self.fw_offline:
-            self.fw.config.new_zone(self.zone, FirewallClientZoneSettings().settings)
-        else:
         self.fw.config().addZone(self.zone, FirewallClientZoneSettings())
 
     def set_disabled_immediate(self):
         self.module.fail_json(msg=self.tx_not_permanent_error_msg)
 
     def set_disabled_permanent(self):
-        if self.fw_offline:
-            zone = self.fw.config.get_zone(self.zone)
-            self.fw.config.remove_zone(zone)
-        else:
         zone_obj = self.fw.config().getZoneByName(self.zone)
         zone_obj.remove()
 
@@ -799,7 +740,6 @@ def main():
             icmp_block=dict(type='str'),
             icmp_block_inversion=dict(type='str'),
             service=dict(type='str'),
-            protocol=dict(type='str'),
             port=dict(type='str'),
             port_forward=dict(type='list', elements='dict'),
             rich_rule=dict(type='str'),
@@ -821,7 +761,7 @@ def main():
             source=('permanent',),
         ),
         mutually_exclusive=[
-            ['icmp_block', 'icmp_block_inversion', 'service', 'protocol', 'port', 'port_forward', 'rich_rule',
+            ['icmp_block', 'icmp_block_inversion', 'service', 'port', 'port_forward', 'rich_rule',
              'interface', 'masquerade', 'source', 'target']
         ],
     )
@@ -850,22 +790,20 @@ def main():
     icmp_block = module.params['icmp_block']
     icmp_block_inversion = module.params['icmp_block_inversion']
     service = module.params['service']
-    protocol = module.params['protocol']
     rich_rule = module.params['rich_rule']
     source = module.params['source']
     zone = module.params['zone']
     target = module.params['target']
 
-    port = None
     if module.params['port'] is not None:
         if '/' in module.params['port']:
-            port, port_protocol = module.params['port'].strip().split('/')
+            port, protocol = module.params['port'].strip().split('/')
         else:
-            port_protocol = None
-        if not port_protocol:
+            protocol = None
+        if not protocol:
             module.fail_json(msg='improper port format (missing protocol?)')
     else:
-        port_protocol = None
+        port = None
 
     port_forward_toaddr = ''
     port_forward = None
@@ -883,7 +821,7 @@ def main():
             port_forward_toaddr = port_forward['toaddr']
 
     modification = False
-    if any([icmp_block, icmp_block_inversion, service, protocol, port, port_forward, rich_rule,
+    if any([icmp_block, icmp_block_inversion, service, port, port_forward, rich_rule,
             interface, masquerade, source, target]):
         modification = True
     if modification and desired_state in ['absent', 'present'] and target is None:
@@ -908,21 +846,12 @@ def main():
             msgs.append("Changed icmp-block %s to %s" % (icmp_block, desired_state))
 
     if icmp_block_inversion is not None:
-        # Type of icmp_block_inversion will be changed to boolean in a future release.
-        icmp_block_inversion_status = True
-        try:
-            icmp_block_inversion_status = boolean(icmp_block_inversion, True)
-        except TypeError:
-            module.warn('The value of the icmp_block_inversion option is "%s". '
-                        'The type of the option will be changed from string to boolean in a future release. '
-                        'To avoid unexpected behavior, please change the value to boolean.' % icmp_block_inversion)
-        expected_state = 'enabled' if (desired_state == 'enabled') == icmp_block_inversion_status else 'disabled'
 
         transaction = IcmpBlockInversionTransaction(
             module,
             action_args=(),
             zone=zone,
-            desired_state=expected_state,
+            desired_state=desired_state,
             permanent=permanent,
             immediate=immediate,
         )
@@ -932,6 +861,14 @@ def main():
         if changed is True:
             msgs.append("Changed icmp-block-inversion %s to %s" % (icmp_block_inversion, desired_state))
 
+        # Type of icmp_block_inversion will be changed to boolean in a future release.
+        try:
+            boolean(icmp_block_inversion, True)
+        except TypeError:
+            module.warn('The value of the icmp_block_inversion option is "%s". '
+                        'The type of the option will be changed from string to boolean in a future release. '
+                        'To avoid unexpected behavior, please change the value to boolean.' % icmp_block_inversion)
+
     if service is not None:
 
         transaction = ServiceTransaction(
@@ -948,22 +885,6 @@ def main():
         if changed is True:
             msgs.append("Changed service %s to %s" % (service, desired_state))
 
-    if protocol is not None:
-
-        transaction = ProtocolTransaction(
-            module,
-            action_args=(protocol, timeout),
-            zone=zone,
-            desired_state=desired_state,
-            permanent=permanent,
-            immediate=immediate,
-        )
-
-        changed, transaction_msgs = transaction.run()
-        msgs = msgs + transaction_msgs
-        if changed is True:
-            msgs.append("Changed protocol %s to %s" % (protocol, desired_state))
-
     if source is not None:
 
         transaction = SourceTransaction(
@@ -982,7 +903,7 @@ def main():
 
         transaction = PortTransaction(
             module,
-            action_args=(port, port_protocol, timeout),
+            action_args=(port, protocol, timeout),
             zone=zone,
             desired_state=desired_state,
             permanent=permanent,
@@ -994,7 +915,7 @@ def main():
         if changed is True:
             msgs.append(
                 "Changed port %s to %s" % (
-                    "%s/%s" % (port, port_protocol), desired_state
+                    "%s/%s" % (port, protocol), desired_state
                 )
             )
 
@@ -1052,21 +973,12 @@ def main():
         msgs = msgs + transaction_msgs
 
     if masquerade is not None:
-        # Type of masquerade will be changed to boolean in a future release.
-        masquerade_status = True
-        try:
-            masquerade_status = boolean(masquerade, True)
-        except TypeError:
-            module.warn('The value of the masquerade option is "%s". '
-                        'The type of the option will be changed from string to boolean in a future release. '
-                        'To avoid unexpected behavior, please change the value to boolean.' % masquerade)
 
-        expected_state = 'enabled' if (desired_state == 'enabled') == masquerade_status else 'disabled'
         transaction = MasqueradeTransaction(
             module,
             action_args=(),
             zone=zone,
-            desired_state=expected_state,
+            desired_state=desired_state,
             permanent=permanent,
             immediate=immediate,
         )
@@ -1074,6 +986,14 @@ def main():
         changed, transaction_msgs = transaction.run()
         msgs = msgs + transaction_msgs
 
+        # Type of masquerade will be changed to boolean in a future release.
+        try:
+            boolean(masquerade, True)
+        except TypeError:
+            module.warn('The value of the masquerade option is "%s". '
+                        'The type of the option will be changed from string to boolean in a future release. '
+                        'To avoid unexpected behavior, please change the value to boolean.' % masquerade)
+
     if target is not None:
 
         transaction = ZoneTargetTransaction(

plugins/modules/firewalld_info.py

@@ -17,7 +17,7 @@ options:
     active_zones:
         description: Gather information about active zones.
         type: bool
-        default: false
+        default: no
     zones:
         description:
             - Gather information about specific zones.
@@ -36,12 +36,7 @@ author:
 EXAMPLES = r'''
 - name: Gather information about active zones
   ansible.posix.firewalld_info:
-    active_zones: true
-  register: result
-
-- name: Print default zone for debugging
-  ansible.builtin.debug:
-    var: result.firewalld_info.default_zone
+    active_zones: yes
 
 - name: Gather information about specific zones
   ansible.posix.firewalld_info:
@@ -49,7 +44,6 @@ EXAMPLES = r'''
       - public
       - external
       - internal
-  register: result
 '''
 
 RETURN = r'''
@@ -84,7 +78,7 @@ firewalld_info:
             returned: success
             type: str
             sample: 0.8.2
-        default_zone:
+        default_zones:
             description:
               - The zone name of default zone.
             returned: success
@@ -210,6 +204,7 @@ firewalld_info:
 '''
 
 from ansible.module_utils.basic import AnsibleModule, missing_required_lib
+from ansible.module_utils.six import raise_from
 from ansible.module_utils._text import to_native
 from ansible_collections.ansible.posix.plugins.module_utils.version import StrictVersion
 

plugins/modules/mount.py

@@ -31,12 +31,12 @@ options:
   src:
     description:
       - Device (or NFS volume, or something else) to be mounted on I(path).
-      - Required when I(state) set to C(present), C(mounted) or C(ephemeral).
+      - Required when I(state) set to C(present) or C(mounted).
     type: path
   fstype:
     description:
       - Filesystem type.
-      - Required when I(state) is C(present), C(mounted) or C(ephemeral).
+      - Required when I(state) is C(present) or C(mounted).
     type: str
   opts:
     description:
@@ -48,7 +48,7 @@ options:
       - Note that if set to C(null) and I(state) set to C(present),
         it will cease to work and duplicate entries will be made
         with subsequent runs.
-      - Has no effect on Solaris systems or when used with C(ephemeral).
+      - Has no effect on Solaris systems.
     type: str
     default: '0'
   passno:
@@ -57,7 +57,7 @@ options:
       - Note that if set to C(null) and I(state) set to C(present),
         it will cease to work and duplicate entries will be made
         with subsequent runs.
-      - Deprecated on Solaris systems. Has no effect when used with C(ephemeral).
+      - Deprecated on Solaris systems.
     type: str
     default: '0'
   state:
@@ -68,13 +68,6 @@ options:
       - If C(unmounted), the device will be unmounted without changing I(fstab).
       - C(present) only specifies that the device is to be configured in
         I(fstab) and does not trigger or require a mount.
-      - C(ephemeral) only specifies that the device is to be mounted, without changing
-        I(fstab). If it is already mounted, a remount will be triggered.
-        This will always return changed=True. If the mount point I(path)
-        has already a device mounted on, and its source is different than I(src),
-        the module will fail to avoid unexpected unmount or mount point override.
-        If the mount point is not present, the mount point will be created.
-        The I(fstab) is completely ignored. This option is added in version 1.5.0.
       - C(absent) specifies that the device mount's entry will be removed from
         I(fstab) and will also unmount the device and remove the mount
         point.
@@ -84,15 +77,10 @@ options:
         applied to the remount, but will not change I(fstab).  Additionally,
         if I(opts) is set, and the remount command fails, the module will
         error to prevent unexpected mount changes.  Try using C(mounted)
-        instead to work around this issue.  C(remounted) expects the mount point
-        to be present in the I(fstab). To remount a mount point not registered
-        in I(fstab), use C(ephemeral) instead, especially with BSD nodes.
-      - C(absent_from_fstab) specifies that the device mount's entry will be
-        removed from I(fstab). This option does not unmount it or delete the
-        mountpoint.
+        instead to work around this issue.
     type: str
     required: true
-    choices: [ absent, absent_from_fstab, mounted, present, unmounted, remounted, ephemeral ]
+    choices: [ absent, mounted, present, unmounted, remounted ]
   fstab:
     description:
       - File to use instead of C(/etc/fstab).
@@ -101,7 +89,6 @@ options:
       - OpenBSD does not allow specifying alternate fstab files with mount so do not
         use this on OpenBSD with any state that operates on the live filesystem.
       - This parameter defaults to /etc/fstab or /etc/vfstab on Solaris.
-      - This parameter is ignored when I(state) is set to C(ephemeral).
     type: str
   boot:
     description:
@@ -113,15 +100,14 @@ options:
         to mount options in I(/etc/fstab).
       - To avoid mount option conflicts, if C(noauto) specified in C(opts),
         mount module will ignore C(boot).
-      - This parameter is ignored when I(state) is set to C(ephemeral).
     type: bool
-    default: true
+    default: yes
   backup:
     description:
       - Create a backup file including the timestamp information so you can get
         the original file back if you somehow clobbered it incorrectly.
     type: bool
-    default: false
+    default: no
 notes:
   - As of Ansible 2.3, the I(name) option has been changed to I(path) as
     default, but I(name) still works as well.
@@ -195,17 +181,9 @@ EXAMPLES = r'''
     src: 192.168.1.100:/nfs/ssd/shared_data
     path: /mnt/shared_data
     opts: rw,sync,hard
-    boot: false
+    boot: no
     state: mounted
     fstype: nfs
-
-- name: Mount ephemeral SMB volume
-  ansible.posix.mount:
-    src: //192.168.1.200/share
-    path: /mnt/smb_share
-    opts: "rw,vers=3,file_mode=0600,dir_mode=0700,dom={{ ad_domain }},username={{ ad_username }},password={{ ad_password }}"
-    fstype: cifs
-    state: ephemeral
 '''
 
 import errno
@@ -452,24 +430,6 @@ def _set_fstab_args(fstab_file):
     return result
 
 
-def _set_ephemeral_args(args):
-    result = []
-    # Set fstype switch according to platform. SunOS/Solaris use -F
-    if platform.system().lower() == 'sunos':
-        result.append('-F')
-    else:
-        result.append('-t')
-    result.append(args['fstype'])
-
-    # Even if '-o remount' is already set, specifying multiple -o is valid
-    if args['opts'] != 'defaults':
-        result += ['-o', args['opts']]
-
-    result.append(args['src'])
-
-    return result
-
-
 def mount(module, args):
     """Mount up a path or remount if needed."""
 
@@ -486,12 +446,8 @@ def mount(module, args):
                     'OpenBSD does not support alternate fstab files. Do not '
                     'specify the fstab parameter for OpenBSD hosts'))
     else:
-        if module.params['state'] != 'ephemeral':
         cmd += _set_fstab_args(args['fstab'])
 
-    if module.params['state'] == 'ephemeral':
-        cmd += _set_ephemeral_args(args)
-
     cmd += [name]
 
     rc, out, err = module.run_command(cmd)
@@ -542,24 +498,18 @@ def remount(module, args):
                     'OpenBSD does not support alternate fstab files. Do not '
                     'specify the fstab parameter for OpenBSD hosts'))
     else:
-        if module.params['state'] != 'ephemeral':
         cmd += _set_fstab_args(args['fstab'])
 
-    if module.params['state'] == 'ephemeral':
-        cmd += _set_ephemeral_args(args)
-
     cmd += [args['name']]
     out = err = ''
 
     try:
-        if module.params['state'] != 'ephemeral' and platform.system().lower().endswith('bsd'):
+        if platform.system().lower().endswith('bsd'):
             # Note: Forcing BSDs to do umount/mount due to BSD remount not
             # working as expected (suspect bug in the BSD mount command)
             # Interested contributor could rework this to use mount options on
             # the CLI instead of relying on fstab
             # https://github.com/ansible/ansible-modules-core/issues/5591
-            # Note: this does not affect ephemeral state as all options
-            # are set on the CLI and fstab is expected to be ignored.
             rc = 1
         else:
             rc, out, err = module.run_command(cmd)
@@ -713,47 +663,6 @@ def get_linux_mounts(module, mntinfo_file="/proc/self/mountinfo"):
     return mounts
 
 
-def _is_same_mount_src(module, src, mountpoint, linux_mounts):
-    """Return True if the mounted fs on mountpoint is the same source than src. Return False if mountpoint is not a mountpoint"""
-    # If the provided mountpoint is not a mountpoint, don't waste time
-    if (
-            not ismount(mountpoint) and
-            not is_bind_mounted(module, linux_mounts, mountpoint)):
-        return False
-
-    # Treat Linux bind mounts
-    if platform.system() == 'Linux' and linux_mounts is not None:
-        # For Linux bind mounts only: the mount command does not return
-        # the actual source for bind mounts, but the device of the source.
-        # is_bind_mounted() called with the 'src' parameter will return True if
-        # the mountpoint is a bind mount AND the source FS is the same than 'src'.
-        # is_bind_mounted() is not reliable on Solaris, NetBSD and OpenBSD.
-        # But we can rely on 'mount -v' on all other platforms, and Linux non-bind mounts.
-        if is_bind_mounted(module, linux_mounts, mountpoint, src):
-            return True
-
-    # mount with parameter -v has a close behavior on Linux, *BSD, SunOS
-    # Requires -v with SunOS. Without -v, source and destination are reversed
-    # Output format differs from a system to another, but field[0:3] are consistent: [src, 'on', dest]
-    cmd = '%s -v' % module.get_bin_path('mount', required=True)
-    rc, out, err = module.run_command(cmd)
-    mounts = []
-
-    if len(out):
-        mounts = to_native(out).strip().split('\n')
-    else:
-        module.fail_json(msg="Unable to retrieve mount info with command '%s'" % cmd)
-
-    for mnt in mounts:
-        fields = mnt.split()
-        mp_src = fields[0]
-        mp_dst = fields[2]
-        if mp_src == src and mp_dst == mountpoint:
-            return True
-
-    return False
-
-
 def main():
     module = AnsibleModule(
         argument_spec=dict(
@@ -766,13 +675,12 @@ def main():
             passno=dict(type='str', no_log=False, default='0'),
             src=dict(type='path'),
             backup=dict(type='bool', default=False),
-            state=dict(type='str', required=True, choices=['absent', 'absent_from_fstab', 'mounted', 'present', 'unmounted', 'remounted', 'ephemeral']),
+            state=dict(type='str', required=True, choices=['absent', 'mounted', 'present', 'unmounted', 'remounted']),
         ),
         supports_check_mode=True,
         required_if=(
             ['state', 'mounted', ['src', 'fstype']],
             ['state', 'present', ['src', 'fstype']],
-            ['state', 'ephemeral', ['src', 'fstype']]
         ),
     )
 
@@ -843,8 +751,6 @@ def main():
 
     # If fstab file does not exist, we first need to create it. This mainly
     # happens when fstab option is passed to the module.
-    # If state is 'ephemeral', we do not need fstab file
-    if module.params['state'] != 'ephemeral':
     if not os.path.exists(args['fstab']):
         if not os.path.exists(os.path.dirname(args['fstab'])):
             os.makedirs(os.path.dirname(args['fstab']))
@@ -864,16 +770,12 @@ def main():
     # mounted:
     #   Add to fstab if not there and make sure it is mounted. If it has
     #   changed in fstab then remount it.
-    # ephemeral:
-    #   Do not change fstab state, but mount.
 
     state = module.params['state']
     name = module.params['path']
     changed = False
 
-    if state == 'absent_from_fstab':
-        name, changed = unset_mount(module, args)
-    elif state == 'absent':
+    if state == 'absent':
         name, changed = unset_mount(module, args)
 
         if changed and not module.check_mode:
@@ -899,7 +801,7 @@ def main():
                         msg="Error unmounting %s: %s" % (name, msg))
 
             changed = True
-    elif state == 'mounted' or state == 'ephemeral':
+    elif state == 'mounted':
         dirs_created = []
         if not os.path.exists(name) and not module.check_mode:
             try:
@@ -927,11 +829,7 @@ def main():
                 module.fail_json(
                     msg="Error making dir %s: %s" % (name, to_native(e)))
 
-        # ephemeral: completely ignore fstab
-        if state != 'ephemeral':
         name, backup_lines, changed = _set_mount_save_old(module, args)
-        else:
-            name, backup_lines, changed = args['name'], [], False
         res = 0
 
         if (
@@ -941,26 +839,7 @@ def main():
             if changed and not module.check_mode:
                 res, msg = remount(module, args)
                 changed = True
-
-            # When 'state' == 'ephemeral', we don't know what is in fstab, and 'changed' is always False
-            if state == 'ephemeral':
-                # If state == 'ephemeral', check if the mountpoint src == module.params['src']
-                # If it doesn't, fail to prevent unwanted unmount or unwanted mountpoint override
-                if _is_same_mount_src(module, args['src'], args['name'], linux_mounts):
-                    changed = True
-                    if not module.check_mode:
-                        res, msg = remount(module, args)
         else:
-                    module.fail_json(
-                        msg=(
-                            'Ephemeral mount point is already mounted with a different '
-                            'source than the specified one. Failing in order to prevent an '
-                            'unwanted unmount or override operation. Try replacing this command with '
-                            'a "state: unmounted" followed by a "state: ephemeral", or use '
-                            'a different destination path.'))
-
-        else:
-            # If not already mounted, mount it
             changed = True
 
             if not module.check_mode:
@@ -972,7 +851,6 @@ def main():
             # A non-working fstab entry may break the system at the reboot,
             # so undo all the changes if possible.
             try:
-                if state != 'ephemeral':
                 write_fstab(module, backup_lines, args['fstab'])
             except Exception:
                 pass

plugins/modules/patch.py

@@ -37,7 +37,7 @@ options:
   src:
     description:
       - Path of the patch file as accepted by the GNU patch tool. If
-        C(remote_src) is C(false), the patch source file is looked up from the
+        C(remote_src) is 'no', the patch source file is looked up from the
         module's I(files) directory.
     type: path
     required: true
@@ -50,10 +50,10 @@ options:
     default: present
   remote_src:
     description:
-      - If C(false), it will search for src at originating/controller machine, if C(true) it will
+      - If C(no), it will search for src at originating/controller machine, if C(yes) it will
         go to the remote/target machine for the C(src).
     type: bool
-    default: false
+    default: no
   strip:
     description:
       - Number that indicates the smallest prefix containing leading slashes
@@ -65,20 +65,20 @@ options:
     description:
       - Passes C(--backup --version-control=numbered) to patch, producing numbered backup copies.
     type: bool
-    default: false
+    default: no
   binary:
     description:
-      - Setting to C(true) will disable patch's heuristic for transforming CRLF
+      - Setting to C(yes) will disable patch's heuristic for transforming CRLF
         line endings into LF.
       - Line endings of src and dest must match.
-      - If set to C(false), C(patch) will replace CRLF in C(src) files on POSIX.
+      - If set to C(no), C(patch) will replace CRLF in C(src) files on POSIX.
     type: bool
-    default: false
+    default: no
   ignore_whitespace:
     description:
-      - Setting to C(true) will ignore white space changes between patch and input.
+      - Setting to C(yes) will ignore white space changes between patch and input..
     type: bool
-    default: false
+    default: no
 notes:
   - This module requires GNU I(patch) utility to be installed on the remote host.
 '''

plugins/modules/rhel_facts.py

@@ -1,76 +0,0 @@
-#!/usr/bin/python
-# -*- coding: utf-8 -*-
-
-# Copyright: Red Hat Inc.
-# GNU General Public License v3.0+ (see COPYING or https://www.gnu.org/licenses/gpl-3.0.txt)
-
-from __future__ import absolute_import, division, print_function
-__metaclass__ = type
-
-DOCUMENTATION = '''
----
-module: rhel_facts
-version_added: 1.5.0
-short_description: Facts module to set or override RHEL specific facts.
-description:
-  - Compatibility layer for using the "package" module for rpm-ostree based systems via setting the "pkg_mgr" fact correctly.
-author:
-  - Adam Miller (@maxamillion)
-requirements:
-  - rpm-ostree
-seealso:
-  - module: ansible.builtin.package
-options: {}
-'''
-
-EXAMPLES = '''
-- name: Playbook to use the package module on all RHEL footprints
-  vars:
-    ansible_facts_modules:
-      - setup # REQUIRED to be run before all custom fact modules
-      - ansible.posix.rhel_facts
-  tasks:
-    - name: Ensure packages are installed
-      ansible.builtin.package:
-        name:
-          - htop
-          - ansible
-        state: present
-'''
-
-RETURN = """
-ansible_facts:
-    description: Relevant Ansible Facts
-    returned: when needed
-    type: complex
-    contains:
-        pkg_mgr:
-            description: System-level package manager override
-            returned: when needed
-            type: str
-            sample: {'pkg_mgr': 'ansible.posix.rhel_facts'}
-"""
-
-import os
-
-from ansible.module_utils.basic import AnsibleModule
-
-
-def main():
-
-    module = AnsibleModule(
-        argument_spec=dict(),
-        supports_check_mode=True,
-    )
-
-    ansible_facts = {}
-
-    # Verify that the platform is an rpm-ostree based system
-    if os.path.exists("/run/ostree-booted"):
-        ansible_facts['pkg_mgr'] = 'ansible.posix.rhel_rpm_ostree'
-
-    module.exit_json(ansible_facts=ansible_facts, changed=False)
-
-
-if __name__ == '__main__':
-    main()

plugins/modules/rhel_rpm_ostree.py

@@ -1,124 +0,0 @@
-#!/usr/bin/python
-# -*- coding: utf-8 -*-
-
-# Copyright: Red Hat Inc.
-# GNU General Public License v3.0+ (see COPYING or https://www.gnu.org/licenses/gpl-3.0.txt)
-
-from __future__ import absolute_import, division, print_function
-__metaclass__ = type
-
-ANSIBLE_METADATA = {'metadata_version': '1.1',
-                    'status': ['preview'],
-                    'supported_by': 'community'}
-
-DOCUMENTATION = '''
----
-module: rhel_rpm_ostree
-version_added: 1.5.0
-short_description: Ensure packages exist in a RHEL for Edge rpm-ostree based system
-description:
-  - Compatibility layer for using the "package" module for RHEL for Edge systems utilizing the RHEL System Roles.
-author:
-  - Adam Miller (@maxamillion)
-requirements:
-  - rpm-ostree
-options:
-  name:
-    description:
-      - A package name or package specifier with version, like C(name-1.0).
-      - Comparison operators for package version are valid here C(>), C(<), C(>=), C(<=). Example - C(name>=1.0)
-      - If a previous version is specified, the task also needs to turn C(allow_downgrade) on.
-        See the C(allow_downgrade) documentation for caveats with downgrading packages.
-      - When using state=latest, this can be C('*') which means run C(yum -y update).
-      - You can also pass a url or a local path to a rpm file (using state=present).
-        To operate on several packages this can accept a comma separated string of packages or (as of 2.0) a list of packages.
-    aliases: [ pkg ]
-    type: list
-    elements: str
-    default: []
-  state:
-    description:
-      - Whether to install (C(present) or C(installed), C(latest)), or remove (C(absent) or C(removed)) a package.
-      - C(present) and C(installed) will simply ensure that a desired package is installed.
-      - C(latest) will update the specified package if it's not of the latest available version.
-      - C(absent) and C(removed) will remove the specified package.
-      - Default is C(None), however in effect the default action is C(present) unless the C(autoremove) option is
-        enabled for this module, then C(absent) is inferred.
-    type: str
-    choices: [ absent, installed, latest, present, removed ]
-notes:
-  - This module does not support installing or removing packages to/from an overlay as this is not supported
-    by RHEL for Edge, packages needed should be defined in the osbuild Blueprint and provided to Image Builder
-    at build time. This module exists only for C(package) module compatibility.
-'''
-
-EXAMPLES = '''
-- name: Ensure htop and ansible are installed on rpm-ostree based RHEL
-  ansible.posix.rhel_rpm_ostree:
-    name:
-      - htop
-      - ansible
-    state: present
-'''
-
-RETURN = """
-msg:
-    description: status of rpm transaction
-    returned: always
-    type: str
-    sample: "No changes made."
-"""
-
-import os
-import traceback
-
-from ansible.module_utils.basic import AnsibleModule
-from ansible.module_utils._text import to_text
-
-
-def locally_installed(module, pkgname):
-    (rc, out, err) = module.run_command('{0} -q {1}'.format(module.get_bin_path("rpm"), pkgname).split())
-    return (rc == 0)
-
-
-def rpm_ostree_transaction(module):
-    pkgs = []
-
-    if module.params['state'] in ['present', 'installed', 'latest']:
-        for pkg in module.params['name']:
-            if not locally_installed(module, pkg):
-                pkgs.append(pkg)
-    elif module.params['state'] in ['absent', 'removed']:
-        for pkg in module.params['name']:
-            if locally_installed(module, pkg):
-                pkgs.append(pkg)
-
-    if not pkgs:
-        module.exit_json(msg="No changes made.")
-    else:
-        if module.params['state'] in ['present', 'installed', 'latest']:
-            module.fail_json(msg="The following packages are absent in the currently booted rpm-ostree commit: %s" ' '.join(pkgs))
-        else:
-            module.fail_json(msg="The following packages are present in the currently booted rpm-ostree commit: %s" ' '.join(pkgs))
-
-
-def main():
-    module = AnsibleModule(
-        argument_spec=dict(
-            name=dict(type='list', elements='str', aliases=['pkg'], default=[]),
-            state=dict(type='str', default=None, choices=['absent', 'installed', 'latest', 'present', 'removed']),
-        ),
-    )
-
-    # Verify that the platform is an rpm-ostree based system
-    if not os.path.exists("/run/ostree-booted"):
-        module.fail_json(msg="Module rpm_ostree is only applicable for rpm-ostree based systems.")
-
-    try:
-        rpm_ostree_transaction(module)
-    except Exception as e:
-        module.fail_json(msg=to_text(e), exception=traceback.format_exc())
-
-
-if __name__ == '__main__':
-    main()

plugins/modules/rpm_ostree_upgrade.py

@@ -1,125 +0,0 @@
-#!/usr/bin/python
-# -*- coding: utf-8 -*-
-
-# Copyright: Red Hat Inc.
-# GNU General Public License v3.0+ (see COPYING or https://www.gnu.org/licenses/gpl-3.0.txt)
-
-from __future__ import absolute_import, division, print_function
-__metaclass__ = type
-
-ANSIBLE_METADATA = {'metadata_version': '1.1',
-                    'status': ['preview'],
-                    'supported_by': 'community'}
-
-DOCUMENTATION = '''
----
-module: rpm_ostree_upgrade
-short_description: Manage rpm-ostree upgrade transactions
-description:
-    - Manage an rpm-ostree upgrade transactions.
-version_added: 1.5.0
-author:
-- Adam Miller (@maxamillion)
-requirements:
-  - rpm-ostree
-options:
-    os:
-        description:
-            - The OSNAME upon which to operate.
-        type: str
-        default: ""
-        required: false
-    cache_only:
-        description:
-          - Perform the transaction using only pre-cached data, do not download.
-        type: bool
-        default: false
-        required: false
-    allow_downgrade:
-        description:
-            - Allow for the upgrade to be a chronologically older tree.
-        type: bool
-        default: false
-        required: false
-    peer:
-        description:
-            - Force peer-to-peer connection instead of using a system message bus.
-        type: bool
-        default: false
-        required: false
-
-'''
-
-EXAMPLES = '''
-- name: Upgrade the rpm-ostree image without options, accept all defaults
-  ansible.posix.rpm_ostree_upgrade:
-
-- name: Upgrade the rpm-ostree image allowing downgrades
-  ansible.posix.rpm_ostree_upgrade:
-    allow_downgrade: true
-'''
-
-RETURN = '''
-msg:
-    description: The command standard output
-    returned: always
-    type: str
-    sample: 'No upgrade available.'
-'''
-
-import os
-import traceback
-
-from ansible.module_utils.basic import AnsibleModule
-from ansible.module_utils._text import to_native, to_text
-
-
-def rpm_ostree_transaction(module):
-    cmd = []
-    cmd.append(module.get_bin_path("rpm-ostree"))
-    cmd.append('upgrade')
-
-    if module.params['os']:
-        cmd += ['--os', module.params['os']]
-    if module.params['cache_only']:
-        cmd += ['--cache-only']
-    if module.params['allow_downgrade']:
-        cmd += ['--allow-downgrade']
-    if module.params['peer']:
-        cmd += ['--peer']
-
-    module.run_command_environ_update = dict(LANG='C', LC_ALL='C', LC_MESSAGES='C')
-
-    rc, out, err = module.run_command(cmd)
-
-    if rc != 0:
-        module.fail_json(rc=rc, msg=err)
-    else:
-        if to_text("No upgrade available.") in to_text(out):
-            module.exit_json(msg=out, changed=False)
-        else:
-            module.exit_json(msg=out, changed=True)
-
-
-def main():
-    module = AnsibleModule(
-        argument_spec=dict(
-            os=dict(type='str', default=''),
-            cache_only=dict(type='bool', default=False),
-            allow_downgrade=dict(type='bool', default=False),
-            peer=dict(type='bool', default=False),
-        ),
-    )
-
-    # Verify that the platform is an rpm-ostree based system
-    if not os.path.exists("/run/ostree-booted"):
-        module.fail_json(msg="Module rpm_ostree_upgrade is only applicable for rpm-ostree based systems.")
-
-    try:
-        rpm_ostree_transaction(module)
-    except Exception as e:
-        module.fail_json(msg=to_native(e), exception=traceback.format_exc())
-
-
-if __name__ == '__main__':
-    main()

plugins/modules/seboolean.py

@@ -22,9 +22,9 @@ options:
     type: str
   persistent:
     description:
-      - Set to C(true) if the boolean setting should survive a reboot.
+      - Set to C(yes) if the boolean setting should survive a reboot.
     type: bool
-    default: false
+    default: 'no'
   state:
     description:
       - Desired boolean value
@@ -49,8 +49,8 @@ EXAMPLES = r'''
 - name: Set httpd_can_network_connect flag on and keep it persistent across reboots
   ansible.posix.seboolean:
     name: httpd_can_network_connect
-    state: true
-    persistent: true
+    state: yes
+    persistent: yes
 '''
 
 import os

plugins/modules/selinux.py

@@ -32,7 +32,7 @@ options:
     description:
       - If set to I(true), will update also the kernel boot parameters when disabling/enabling SELinux.
       - The C(grubby) tool must be present on the target system for this to work.
-    default: false
+    default: no
     type: bool
     version_added: '1.4.0'
   configfile:

plugins/modules/synchronize.py

@@ -53,36 +53,36 @@ options:
     description:
       - Mirrors the rsync archive flag, enables recursive, links, perms, times, owner, group flags and -D.
     type: bool
-    default: true
+    default: yes
   checksum:
     description:
       - Skip based on checksum, rather than mod-time & size; Note that that "archive" option is still enabled by default - the "checksum" option will
         not disable it.
     type: bool
-    default: false
+    default: no
   compress:
     description:
       - Compress file data during the transfer.
       - In most cases, leave this enabled unless it causes problems.
     type: bool
-    default: true
+    default: yes
   existing_only:
     description:
       - Skip creating new files on receiver.
     type: bool
-    default: false
+    default: no
   delete:
     description:
       - Delete files in I(dest) that do not exist (after transfer, not before) in the I(src) path.
-      - This option requires I(recursive=true).
+      - This option requires I(recursive=yes).
       - This option ignores excluded files and behaves like the rsync opt C(--delete-after).
     type: bool
-    default: false
+    default: no
   dirs:
     description:
       - Transfer directories without recursing.
     type: bool
-    default: false
+    default: no
   recursive:
     description:
       - Recurse into directories.
@@ -97,7 +97,7 @@ options:
     description:
       - Copy symlinks as the item that they point to (the referent) is copied, rather than the symlink.
     type: bool
-    default: false
+    default: no
   perms:
     description:
       - Preserve permissions.
@@ -132,26 +132,26 @@ options:
     description:
       - Put user@ for the remote paths.
       - If you have a custom ssh config to define the remote user for a host
-        that does not match the inventory user, you should set this parameter to C(false).
+        that does not match the inventory user, you should set this parameter to C(no).
     type: bool
-    default: true
+    default: yes
   use_ssh_args:
     description:
       - In Ansible 2.10 and lower, it uses the ssh_args specified in C(ansible.cfg).
       - In Ansible 2.11 and onwards, when set to C(true), it uses all SSH connection configurations like
         C(ansible_ssh_args), C(ansible_ssh_common_args), and C(ansible_ssh_extra_args).
     type: bool
-    default: false
+    default: no
   ssh_connection_multiplexing:
     description:
       - SSH connection multiplexing for rsync is disabled by default to prevent misconfigured ControlSockets from resulting in failed SSH connections.
         This is accomplished by setting the SSH C(ControlSocket) to C(none).
-      - Set this option to C(true) to allow multiplexing and reduce SSH connection overhead.
-      - Note that simply setting this option to C(true) is not enough;
+      - Set this option to C(yes) to allow multiplexing and reduce SSH connection overhead.
+      - Note that simply setting this option to C(yes) is not enough;
         You must also configure SSH connection multiplexing in your SSH client config by setting values for
         C(ControlMaster), C(ControlPersist) and C(ControlPath).
     type: bool
-    default: false
+    default: no
   rsync_opts:
     description:
       - Specify additional rsync options by passing in an array.
@@ -163,12 +163,12 @@ options:
     description:
       - Tells rsync to keep the partial file which should make a subsequent transfer of the rest of the file much faster.
     type: bool
-    default: false
+    default: no
   verify_host:
     description:
       - Verify destination host key.
     type: bool
-    default: false
+    default: no
   private_key:
     description:
       - Specify the private key to use for SSH-based rsync connections (e.g. C(~/.ssh/id_rsa)).
@@ -184,7 +184,7 @@ options:
       - This option puts the temporary file from each updated file into a holding directory until the end of the transfer,
         at which time all the files are renamed into place in rapid succession.
     type: bool
-    default: true
+    default: yes
     version_added: '1.3.0'
 
 notes:
@@ -212,7 +212,7 @@ notes:
    - link_destination is subject to the same limitations as the underlying rsync daemon. Hard links are only preserved if the relative subtrees
      of the source and destination are the same. Attempts to hardlink into a directory that is a subdirectory of the source will be prevented.
 seealso:
-- module: ansible.builtin.copy
+- module: copy
 - module: community.windows.win_robocopy
 author:
 - Timothy Appnel (@tima)
@@ -252,27 +252,27 @@ EXAMPLES = r'''
   ansible.posix.synchronize:
     src: some/relative/path
     dest: /some/absolute/path
-    archive: false
+    archive: no
 
 - name: Synchronization with --archive options enabled except for --recursive
   ansible.posix.synchronize:
     src: some/relative/path
     dest: /some/absolute/path
-    recursive: false
+    recursive: no
 
 - name: Synchronization with --archive options enabled except for --times, with --checksum option enabled
   ansible.posix.synchronize:
     src: some/relative/path
     dest: /some/absolute/path
-    checksum: true
-    times: false
+    checksum: yes
+    times: no
 
 - name: Synchronization without --archive options enabled except use --links
   ansible.posix.synchronize:
     src: some/relative/path
     dest: /some/absolute/path
-    archive: false
-    links: true
+    archive: no
+    links: yes
 
 - name: Synchronization of two paths both on the control machine
   ansible.posix.synchronize:
@@ -302,8 +302,8 @@ EXAMPLES = r'''
   ansible.posix.synchronize:
     src: some/relative/path
     dest: /some/absolute/path
-    delete: true
-    recursive: true
+    delete: yes
+    recursive: yes
 
 # This specific command is granted su privileges on the destination
 - name: Synchronize using an alternate rsync command

plugins/modules/sysctl.py

@@ -38,14 +38,14 @@ options:
         description:
             - Use this option to ignore errors about unknown keys.
         type: bool
-        default: false
+        default: 'no'
     reload:
         description:
-            - If C(true), performs a I(/sbin/sysctl -p) if the C(sysctl_file) is
-              updated. If C(false), does not reload I(sysctl) even if the
+            - If C(yes), performs a I(/sbin/sysctl -p) if the C(sysctl_file) is
+              updated. If C(no), does not reload I(sysctl) even if the
               C(sysctl_file) is updated.
         type: bool
-        default: true
+        default: 'yes'
     sysctl_file:
         description:
             - Specifies the absolute path to C(sysctl.conf), if not C(/etc/sysctl.conf).
@@ -53,9 +53,9 @@ options:
         type: path
     sysctl_set:
         description:
-            - Verify token value with the sysctl command and set with -w if necessary.
+            - Verify token value with the sysctl command and set with -w if necessary
         type: bool
-        default: false
+        default: 'no'
 author:
 - David CHANIAL (@davixx)
 '''
@@ -78,21 +78,21 @@ EXAMPLES = r'''
     name: kernel.panic
     value: '3'
     sysctl_file: /tmp/test_sysctl.conf
-    reload: false
+    reload: no
 
 # Set ip forwarding on in /proc and verify token value with the sysctl command
 - ansible.posix.sysctl:
     name: net.ipv4.ip_forward
     value: '1'
-    sysctl_set: true
+    sysctl_set: yes
 
 # Set ip forwarding on in /proc and in the sysctl file and reload if necessary
 - ansible.posix.sysctl:
     name: net.ipv4.ip_forward
     value: '1'
-    sysctl_set: true
+    sysctl_set: yes
     state: present
-    reload: true
+    reload: yes
 '''
 
 # ==============================================================

tests/integration/targets/firewalld/tasks/icmp_block_inversion_test_cases.yml

@@ -1,172 +0,0 @@
-# Test playbook for the firewalld module - icmp block inversion operations
-# (c) 2022, Gregory Furlong <gnfzdz@fzdz.io>
-# GNU General Public License v3.0+ (see COPYING or https://www.gnu.org/licenses/gpl-3.0.txt)
-
-- name: Icmp block inversion enabled when icmp block inversion is truthy and state is enabled
-  block:
-  - name: Testing enable icmp block inversion
-    ansible.posix.firewalld:
-      zone:       trusted
-      icmp_block_inversion: yes
-      permanent:  yes
-      state:      enabled
-    register: result
-
-  - name: assert icmp block inversion is enabled
-    assert:
-      that:
-      - result is changed
-
-  - name: Testing enable icmp block inversion (verify not changed)
-    ansible.posix.firewalld:
-      zone:       trusted
-      icmp_block_inversion: yes
-      permanent:  yes
-      state:      enabled
-    register: result
-
-  - name: assert icmp block inversion is enabled (verify not changed)
-    assert:
-      that:
-      - result is not changed
-
-- name: Icmp block inversion disabled when icmp block inversion is falsy and state is enabled
-  block:
-  - name: Testing disable icmp block inversion
-    ansible.posix.firewalld:
-      zone:       trusted
-      icmp_block_inversion: no
-      permanent:  yes
-      state:      enabled
-    register: result
-
-  - name: assert icmp block inversion is disabled
-    assert:
-      that:
-      - result is changed
-
-  - name: Testing disable icmp block inversion (verify not changed)
-    ansible.posix.firewalld:
-      zone:       trusted
-      icmp_block_inversion: no
-      permanent:  yes
-      state:      enabled
-    register: result
-
-  - name: assert icmp block inversion is disabled (verify not changed)
-    assert:
-      that:
-      - result is not changed
-
-- name: Icmp block inversion enabled when icmp block inversion is falsy and state is disabled
-  block:
-  - name: Testing enable icmp block inversion
-    ansible.posix.firewalld:
-      zone:       trusted
-      icmp_block_inversion: no
-      permanent:  yes
-      state:      disabled
-    register: result
-
-  - name: assert icmp block inversion is enabled
-    assert:
-      that:
-      - result is changed
-
-  - name: Testing enable icmp block inversion (verify not changed)
-    ansible.posix.firewalld:
-      zone:       trusted
-      icmp_block_inversion: no
-      permanent:  yes
-      state:      disabled
-    register: result
-
-  - name: assert icmp block inversion is enabled (verify not changed)
-    assert:
-      that:
-      - result is not changed
-
-- name: Icmp block inversion disabled when icmp block inversion is truthy and state is disabled
-  block:
-  - name: Testing disable icmp block inversion
-    ansible.posix.firewalld:
-      zone:       trusted
-      icmp_block_inversion: yes
-      permanent:  yes
-      state:      disabled
-    register: result
-
-  - name: assert icmp block inversion is disabled
-    assert:
-      that:
-      - result is changed
-
-  - name: Testing disable icmp block inversion (verify not changed)
-    ansible.posix.firewalld:
-      zone:       trusted
-      icmp_block_inversion: yes
-      permanent:  yes
-      state:      disabled
-    register: result
-
-  - name: assert icmp block inversion is disabled (verify not changed)
-    assert:
-      that:
-      - result is not changed
-
-# Validate backwards compatible behavior until icmp block inversion is switched from string to boolean type
-- name: Icmp block inversion enabled when icmp block inversion is non-boolean string and state is enabled
-  block:
-  - name: Testing enable icmp block inversion
-    ansible.posix.firewalld:
-      zone:       trusted
-      icmp_block_inversion: 'some string'
-      permanent:  yes
-      state:      enabled
-    register: result
-
-  - name: assert icmp block inversion is enabled
-    assert:
-      that:
-      - result is changed
-
-  - name: Testing enable icmp block inversion (verify not changed)
-    ansible.posix.firewalld:
-      zone:       trusted
-      icmp_block_inversion: 'some string'
-      permanent:  yes
-      state:      enabled
-    register: result
-
-  - name: assert icmp block inversion is enabled (verify not changed)
-    assert:
-      that:
-      - result is not changed
-
-- name: Icmp block inversion disabled when icmp block inversion is non-boolean string and state is disabled
-  block:
-  - name: Testing disable icmp block inversion
-    ansible.posix.firewalld:
-      zone:       trusted
-      icmp_block_inversion: 'some string'
-      permanent:  yes
-      state:      disabled
-    register: result
-
-  - name: assert icmp block inversion is disabled
-    assert:
-      that:
-      - result is changed
-
-  - name: Testing disable icmp block inversion (verify not changed)
-    ansible.posix.firewalld:
-      zone:       trusted
-      icmp_block_inversion: 'some string'
-      permanent:  yes
-      state:      disabled
-    register: result
-
-  - name: assert icmp block inversion is disabled (verify not changed)
-    assert:
-      that:
-      - result is not changed

tests/integration/targets/firewalld/tasks/interface_test_cases.yml

@@ -1,87 +0,0 @@
-# Test playbook for the firewalld module - interface operations
-# (c) 2022, Gregory Furlong <gnfzdz@fzdz.io>
-# GNU General Public License v3.0+ (see COPYING or https://www.gnu.org/licenses/gpl-3.0.txt)
-
-- name: Validate adding interface
-  block:
-  - name: Add lo interface to trusted zone
-    ansible.posix.firewalld:
-      interface: lo
-      zone: trusted
-      permanent: Yes
-      state: enabled
-    register: result
-
-  - name: assert lo was added to trusted zone
-    assert:
-      that:
-      - result is changed
-
-  - name: Add lo interface to trusted zone (verify not changed)
-    ansible.posix.firewalld:
-      interface: lo
-      zone: trusted
-      permanent: Yes
-      state: enabled
-    register: result
-
-  - name: assert lo was added to trusted zone (verify not changed)
-    assert:
-      that:
-      - result is not changed
-
-- name: Validate moving interfaces
-  block:
-  - name: Move lo interface from trusted zone to internal zone
-    ansible.posix.firewalld:
-      interface: lo
-      zone: internal
-      permanent: Yes
-      state: enabled
-    register: result
-
-  - name: Assert lo was moved from trusted zone to internal zone
-    assert:
-      that:
-      - result is changed
-
-  - name: Move lo interface from trusted zone to internal zone (verify not changed)
-    ansible.posix.firewalld:
-      interface: lo
-      zone: internal
-      permanent: Yes
-      state: enabled
-    register: result
-
-  - name: assert lo was moved from trusted zone to internal zone (verify not changed)
-    assert:
-      that:
-      - result is not changed
-
-- name: Validate removing interface
-  block:
-  - name: Remove lo interface from internal zone
-    ansible.posix.firewalld:
-      interface: lo
-      zone: internal
-      permanent: Yes
-      state: disabled
-    register: result
-
-  - name: Assert lo interface was removed from internal zone
-    assert:
-      that:
-      - result is changed
-
-  - name: Remove lo interface from internal zone (verify not changed)
-    ansible.posix.firewalld:
-      interface: lo
-      zone: internal
-      permanent: Yes
-      state: disabled
-    register: result
-
-  - name: Assert lo interface was removed from internal zone (verify not changed)
-    assert:
-      that:
-      - result is not changed

tests/integration/targets/firewalld/tasks/masquerade_test_cases.yml

@@ -1,172 +0,0 @@
-# Test playbook for the firewalld module - masquerade operations
-# (c) 2022, Gregory Furlong <gnfzdz@fzdz.io>
-# GNU General Public License v3.0+ (see COPYING or https://www.gnu.org/licenses/gpl-3.0.txt)
-
-- name: Masquerade enabled when masquerade is truthy and state is enabled
-  block:
-  - name: Testing enable masquerade
-    ansible.posix.firewalld:
-      zone:       trusted
-      masquerade: yes
-      permanent:  yes
-      state:      enabled
-    register: result
-
-  - name: assert masquerade is enabled
-    assert:
-      that:
-      - result is changed
-
-  - name: Testing enable masquerade (verify not changed)
-    ansible.posix.firewalld:
-      zone:       trusted
-      masquerade: yes
-      permanent:  yes
-      state:      enabled
-    register: result
-
-  - name: assert masquerade is enabled (verify not changed)
-    assert:
-      that:
-      - result is not changed
-
-- name: Masquerade disabled when masquerade is falsy and state is enabled
-  block:
-  - name: Testing disable masquerade
-    ansible.posix.firewalld:
-      zone:       trusted
-      masquerade: no
-      permanent:  yes
-      state:      enabled
-    register: result
-
-  - name: assert masquerade is disabled
-    assert:
-      that:
-      - result is changed
-
-  - name: Testing disable masquerade (verify not changed)
-    ansible.posix.firewalld:
-      zone:       trusted
-      masquerade: no
-      permanent:  yes
-      state:      enabled
-    register: result
-
-  - name: assert masquerade is disabled (verify not changed)
-    assert:
-      that:
-      - result is not changed
-
-- name: Masquerade enabled when masquerade is falsy and state is disabled
-  block:
-  - name: Testing enable masquerade
-    ansible.posix.firewalld:
-      zone:       trusted
-      masquerade: no
-      permanent:  yes
-      state:      disabled
-    register: result
-
-  - name: assert masquerade is enabled
-    assert:
-      that:
-      - result is changed
-
-  - name: Testing enable masquerade (verify not changed)
-    ansible.posix.firewalld:
-      zone:       trusted
-      masquerade: no
-      permanent:  yes
-      state:      disabled
-    register: result
-
-  - name: assert masquerade is enabled (verify not changed)
-    assert:
-      that:
-      - result is not changed
-
-- name: Masquerade disabled when masquerade is truthy and state is disabled
-  block:
-  - name: Testing disable masquerade
-    ansible.posix.firewalld:
-      zone:       trusted
-      masquerade: yes
-      permanent:  yes
-      state:      disabled
-    register: result
-
-  - name: assert masquerade is disabled
-    assert:
-      that:
-      - result is changed
-
-  - name: Testing disable masquerade (verify not changed)
-    ansible.posix.firewalld:
-      zone:       trusted
-      masquerade: yes
-      permanent:  yes
-      state:      disabled
-    register: result
-
-  - name: assert masquerade is disabled (verify not changed)
-    assert:
-      that:
-      - result is not changed
-
-# Validate backwards compatible behavior until masquerade is switched from string to boolean type
-- name: Masquerade enabled when masquerade is non-boolean string and state is enabled
-  block:
-  - name: Testing enable masquerade
-    ansible.posix.firewalld:
-      zone:       trusted
-      masquerade: 'some string'
-      permanent:  yes
-      state:      enabled
-    register: result
-
-  - name: assert masquerade is enabled
-    assert:
-      that:
-      - result is changed
-
-  - name: Testing enable masquerade (verify not changed)
-    ansible.posix.firewalld:
-      zone:       trusted
-      masquerade: 'some string'
-      permanent:  yes
-      state:      enabled
-    register: result
-
-  - name: assert masquerade is enabled (verify not changed)
-    assert:
-      that:
-      - result is not changed
-
-- name: Masquerade disabled when masquerade is non-boolean string and state is disabled
-  block:
-  - name: Testing disable masquerade
-    ansible.posix.firewalld:
-      zone:       trusted
-      masquerade: 'some string'
-      permanent:  yes
-      state:      disabled
-    register: result
-
-  - name: assert masquerade is disabled
-    assert:
-      that:
-      - result is changed
-
-  - name: Testing disable masquerade (verify not changed)
-    ansible.posix.firewalld:
-      zone:       trusted
-      masquerade: 'some string'
-      permanent:  yes
-      state:      disabled
-    register: result
-
-  - name: assert masquerade is disabled (verify not changed)
-    assert:
-      that:
-      - result is not changed

tests/integration/targets/firewalld/tasks/port_test_cases.yml

@@ -4,7 +4,7 @@
 
 - name: firewalld port range test permanent enabled
   firewalld:
-    port: 5500-6850/tcp
+    port: 5500-6950/tcp
     permanent: true
     state: enabled
   register: result
@@ -16,7 +16,7 @@
 
 - name: firewalld port range test permanent enabled rerun (verify not changed)
   firewalld:
-    port: 5500-6850/tcp
+    port: 5500-6950/tcp
     permanent: true
     state: enabled
   register: result
@@ -57,7 +57,7 @@
     state: disabled
   loop:
     - 6900/tcp
-    - 5500-6850/tcp
+    - 5500-6950/tcp
 
 - name: firewalld port test permanent enabled
   firewalld:

tests/integration/targets/firewalld/tasks/protocol_test_cases.yml

@@ -1,65 +0,0 @@
-# Test playbook for the firewalld module - protocol operations
-# (c) 2022, Robért S. Guhr <rguhr@cronon.net>
-
-# This file is part of Ansible
-#
-# Ansible is free software: you can redistribute it and/or modify
-# it under the terms of the GNU General Public License as published by
-# the Free Software Foundation, either version 3 of the License, or
-# (at your option) any later version.
-#
-# Ansible is distributed in the hope that it will be useful,
-# but WITHOUT ANY WARRANTY; without even the implied warranty of
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-# GNU General Public License for more details.
-#
-# You should have received a copy of the GNU General Public License
-# along with Ansible.  If not, see <http://www.gnu.org/licenses/>.
-
-- name: firewalld protocol test permanent enabled
-  firewalld:
-    protocol: ospf
-    permanent: true
-    state: enabled
-  register: result
-
-- name: assert firewalld protocol test permanent enabled worked
-  assert:
-    that:
-    - result is changed
-
-- name: firewalld protocol test permanent enabled rerun (verify not changed)
-  firewalld:
-    protocol: ospf
-    permanent: true
-    state: enabled
-  register: result
-
-- name: assert firewalld protocol test permanent enabled rerun worked (verify not changed)
-  assert:
-    that:
-    - result is not changed
-
-- name: firewalld protocol test permanent disabled
-  firewalld:
-    protocol: ospf
-    permanent: true
-    state: disabled
-  register: result
-
-- name: assert firewalld protocol test permanent disabled worked
-  assert:
-    that:
-    - result is changed
-
-- name: firewalld protocol test permanent disabled rerun (verify not changed)
-  firewalld:
-    protocol: ospf
-    permanent: true
-    state: disabled
-  register: result
-
-- name: assert firewalld protocol test permanent disabled rerun worked (verify not changed)
-  assert:
-    that:
-    - result is not changed

tests/integration/targets/firewalld/tasks/run_all_tests.yml

@@ -10,29 +10,14 @@
 # firewalld service operation test cases
 - include_tasks: service_test_cases.yml
 
-# firewalld protocol operation test cases
-- include_tasks: protocol_test_cases.yml
-
 # firewalld port operation test cases
 - include_tasks: port_test_cases.yml
 
 # firewalld source operation test cases
 - include_tasks: source_test_cases.yml
 
-# firewalld zone operation test cases
-- include_tasks: zone_test_cases.yml
-
 # firewalld zone target operation test cases
 - include_tasks: zone_target_test_cases.yml
 
 # firewalld port forwarding operation test cases
 - include_tasks: port_forward_test_cases.yml
-
-# firewalld masquerade operation test cases
-- include_tasks: masquerade_test_cases.yml
-
-# firewalld icmp block inversion operation test cases
-- include_tasks: icmp_block_inversion_test_cases.yml
-
-# firewalld interface operation test cases
-- include_tasks: interface_test_cases.yml

tests/integration/targets/firewalld/tasks/source_test_cases.yml

@@ -82,4 +82,4 @@
   assert:
     that:
     - result is not changed
-    - "result.msg == 'parameters are mutually exclusive: icmp_block|icmp_block_inversion|service|protocol|port|port_forward|rich_rule|interface|masquerade|source|target'"
+    - "result.msg == 'parameters are mutually exclusive: icmp_block|icmp_block_inversion|service|port|port_forward|rich_rule|interface|masquerade|source|target'"

tests/integration/targets/firewalld/tasks/zone_test_cases.yml

@@ -1,47 +0,0 @@
-- name: firewalld create zone custom
-  firewalld:
-    zone: custom
-    permanent: True
-    state: present
-  register: result
-
-- name: assert firewalld custom zone created worked
-  assert:
-    that:
-    - result is changed
-
-- name: firewalld create zone custom rerun (verify not changed)
-  firewalld:
-    zone: custom
-    permanent: True
-    state: present
-  register: result
-
-- name: assert firewalld custom zone created worked (verify not changed)
-  assert:
-    that:
-    - result is not changed
-
-- name: firewalld remove zone custom
-  firewalld:
-    zone: custom
-    permanent: True
-    state: absent
-  register: result
-
-- name: assert firewalld custom zone removed worked
-  assert:
-    that:
-    - result is changed
-
-- name: firewalld remove custom zone rerun (verify not changed)
-  firewalld:
-    zone: custom
-    permanent: True
-    state: absent
-  register: result
-
-- name: assert firewalld custom zone removed worked (verify not changed)
-  assert:
-    that:
-    - result is not changed

tests/integration/targets/mount/tasks/main.yml

@@ -1,9 +1,3 @@
-- name: Install dependencies
-  ansible.builtin.package:
-    name: e2fsprogs
-    state: present
-  when: ansible_system == 'Linux'
-
 - name: Create the mount point
   file:
     state: directory
@@ -412,270 +406,3 @@
     - /tmp/myfs1
     - /tmp/test_fstab
   when: ansible_system in ('Linux')
-
-- name: Block to test ephemeral option
-  environment:
-    PATH: /usr/local/sbin:/usr/local/bin:/usr/sbin:/usr/bin:/sbin:/bin
-  block:
-  - name: Create empty file A
-    community.general.filesize:
-      path: /tmp/myfs_A.img
-      size: 20M
-
-  - name: Create empty file B
-    community.general.filesize:
-      path: /tmp/myfs_B.img
-      size: 20M
-
-  - name: Register facts on Linux
-    ansible.builtin.set_fact:
-      ephemeral_device_A: /tmp/myfs_A.img
-      ephemeral_device_B: /tmp/myfs_B.img
-      ephemeral_fstype: ext3
-      ephemeral_fstab: /etc/fstab
-    when: ansible_system == 'Linux'
-
-  - name: Register facts on Solaris/SunOS
-    ansible.builtin.set_fact:
-      ephemeral_device_A: /dev/lofi/1
-      ephemeral_device_B: /dev/lofi/2
-      ephemeral_create_loop_dev_cmd: >
-        lofiadm -a /tmp/myfs_A.img /dev/lofi/1 &&
-        lofiadm -a /tmp/myfs_B.img /dev/lofi/2
-      ephemeral_remove_loop_dev_cmd: >
-        lofiadm -d /dev/lofi/1 &&
-        lofiadm -d /dev/lofi/2 || true
-      ephemeral_fstype: ufs
-      ephemeral_fstab: /etc/vfstab
-    when: ansible_system == 'SunOS'
-
-  - name: Register facts on FreeBSD
-    ansible.builtin.set_fact:
-      ephemeral_device_A: /dev/md1
-      ephemeral_device_B: /dev/md2
-      ephemeral_create_loop_dev_cmd: >
-        mdconfig -a -t vnode -f /tmp/myfs_A.img -u /dev/md1 &&
-        mdconfig -a -t vnode -f /tmp/myfs_B.img -u /dev/md2
-      ephemeral_remove_loop_dev_cmd: >
-        mdconfig -d -u /dev/md1 &&
-        mdconfig -d -u /dev/md2
-      ephemeral_fstype: ufs
-      ephemeral_fstab: /etc/fstab
-    when: ansible_system == 'FreeBSD'
-
-  - name: Register facts on NetBSD
-    ansible.builtin.set_fact:
-      ephemeral_device_A: /dev/vnd1
-      ephemeral_device_B: /dev/vnd2
-      ephemeral_create_loop_dev_cmd: >
-        vnconfig /dev/vnd1 /tmp/myfs_A.img &&
-        vnconfig /dev/vnd2 /tmp/myfs_B.img
-      ephemeral_remove_loop_dev_cmd: >
-        vnconfig -u /dev/vnd1 &&
-        vnconfig -u /dev/vnd2
-      ephemeral_fstype: ufs
-      ephemeral_fstab: /etc/fstab
-    when: ansible_system == 'NetBSD'
-
-  - name: Register format fs command on Non-Linux and Non-OpenBSD
-    ansible.builtin.set_fact:
-      ephemeral_format_fs_cmd: >
-        yes | newfs {{ ephemeral_device_A }} &&
-        yes | newfs {{ ephemeral_device_B }}
-    when: ansible_system in ('SunOS', 'FreeBSD', 'NetBSD')
-
-  - name: Register facts on OpenBSD
-    ansible.builtin.set_fact:
-      ephemeral_device_A: /dev/vnd1c
-      ephemeral_device_B: /dev/vnd2c
-      ephemeral_create_loop_dev_cmd: >
-        vnconfig vnd1 /tmp/myfs_A.img &&
-        vnconfig vnd2 /tmp/myfs_B.img
-      ephemeral_remove_loop_dev_cmd: >
-        vnconfig -u vnd1 &&
-        vnconfig -u vnd2
-      ephemeral_format_fs_cmd: >
-        yes | newfs /dev/rvnd1c &&
-        yes | newfs /dev/rvnd2c
-      ephemeral_fstype: ffs
-      ephemeral_fstab: /etc/fstab
-    when: ansible_system == 'OpenBSD'
-
-##### FORMAT FS ON LINUX
-
-  - name: Block to format FS on Linux
-    block:
-    - name: Format FS A on Linux
-      community.general.filesystem:
-        fstype: ext3
-        dev: /tmp/myfs_A.img
-
-    - name: Format FS B on Linux
-      community.general.filesystem:
-        fstype: ext3
-        dev: /tmp/myfs_B.img
-    when: ansible_system == 'Linux'
-
-##### FORMAT FS ON SOLARIS AND BSD
-
-  - name: Create loop devices on Solaris and BSD
-    ansible.builtin.shell: "{{ ephemeral_create_loop_dev_cmd }}"
-    when: ephemeral_create_loop_dev_cmd is defined
-
-  - name: Format FS A and B on Solaris and BSD
-    ansible.builtin.shell: "{{ ephemeral_format_fs_cmd }}"
-    when: ephemeral_format_fs_cmd is defined
-
-##### TESTS
-
-  - name: Create fstab if it does not exist
-    ansible.builtin.file:
-      path: "{{ ephemeral_fstab }}"
-      state: touch
-
-  - name: Get checksum of /etc/fstab before mounting anything
-    stat:
-      path: '{{ ephemeral_fstab }}'
-    register: fstab_stat_before_mount
-
-  - name: Mount the FS A with ephemeral state
-    mount:
-      path: /tmp/myfs
-      src: '{{ ephemeral_device_A }}'
-      fstype: '{{ ephemeral_fstype }}'
-      opts: rw
-      state: ephemeral
-    register: ephemeral_mount_info
-
-  - name: Put something in the directory so we can do additional checks later on
-    copy:
-      content: 'Testing'
-      dest: /tmp/myfs/test_file
-
-  - name: Get checksum of /etc/fstab after an ephemeral mount
-    stat:
-      path: '{{ ephemeral_fstab }}'
-    register: fstab_stat_after_mount
-
-  - name: Get mountinfo
-    shell: mount -v | awk '{print $3}' | grep '^/tmp/myfs$' | wc -l
-    register: check_mountinfo
-    changed_when: no
-
-  - name: Assert the mount occured and the fstab is unchanged
-    assert:
-      that:
-      - check_mountinfo.stdout|int == 1
-      - ephemeral_mount_info['changed']
-      - fstab_stat_before_mount['stat']['checksum'] == fstab_stat_after_mount['stat']['checksum']
-
-  - name: Get first mount record
-    shell: mount -v | grep '/tmp/myfs'
-    register: ephemeral_mount_record_1
-    changed_when: no
-
-  - name: Try to mount FS A where FS A is already mounted (should trigger remount and changed)
-    mount:
-      path: /tmp/myfs
-      src: '{{ ephemeral_device_A }}'
-      fstype: '{{ ephemeral_fstype }}'
-      opts: ro
-      state: ephemeral
-    register: ephemeral_mount_info
-
-  - name: Get second mount record (should be different than the first)
-    shell: mount -v | grep '/tmp/myfs'
-    register: ephemeral_mount_record_2
-    changed_when: no
-
-  - name: Get mountinfo
-    shell: mount -v | awk '{print $3}' | grep '^/tmp/myfs$' | wc -l
-    register: check_mountinfo
-    changed_when: no
-
-  - name: Assert the FS A is still mounted, the options changed and the fstab unchanged
-    assert:
-      that:
-        - check_mountinfo.stdout|int == 1
-        - ephemeral_mount_record_1.stdout != ephemeral_mount_record_2.stdout
-        - ephemeral_mount_info['changed']
-        - fstab_stat_before_mount['stat']['checksum'] == fstab_stat_after_mount['stat']['checksum']
-
-  - name: Try to mount file B on file A mountpoint (should fail)
-    mount:
-      path: /tmp/myfs
-      src: '{{ ephemeral_device_B }}'
-      fstype: '{{ ephemeral_fstype }}'
-      state: ephemeral
-    register: ephemeral_mount_b_info
-    ignore_errors: true
-
-  - name: Get third mount record (should be the same than the second)
-    shell: mount -v | grep '/tmp/myfs'
-    register: ephemeral_mount_record_3
-    changed_when: no
-
-  - name: Get mountinfo
-    shell: mount -v | awk '{print $3}' | grep '^/tmp/myfs$' | wc -l
-    register: check_mountinfo
-    changed_when: no
-
-  - name: Try to stat our test file
-    stat:
-      path: /tmp/myfs/test_file
-    register: test_file_stat
-
-  - name: Assert that mounting FS B over FS A failed
-    assert:
-      that:
-        - check_mountinfo.stdout|int == 1
-        - ephemeral_mount_record_2.stdout == ephemeral_mount_record_3.stdout
-        - test_file_stat['stat']['exists']
-        - ephemeral_mount_b_info is failed
-
-  - name: Unmount FS with state = unmounted
-    mount:
-      path: /tmp/myfs
-      state: unmounted
-
-  - name: Get fstab checksum after unmounting an ephemeral mount with state = unmounted
-    stat:
-      path: '{{ ephemeral_fstab }}'
-    register: fstab_stat_after_unmount
-
-  - name: Get mountinfo
-    shell: mount -v | awk '{print $3}' | grep '^/tmp/myfs$' | wc -l
-    register: check_mountinfo
-    changed_when: no
-
-  - name: Try to stat our test file
-    stat:
-      path: /tmp/myfs/test_file
-    register: test_file_stat
-
-  - name: Assert that fstab is unchanged after unmounting an ephemeral mount with state = unmounted
-    assert:
-      that:
-      - check_mountinfo.stdout|int == 0
-      - not test_file_stat['stat']['exists']
-      - fstab_stat_before_mount['stat']['checksum'] == fstab_stat_after_unmount['stat']['checksum']
-
-  always:
-    - name: Unmount potential failure relicas
-      mount:
-        path: /tmp/myfs
-        state: unmounted
-
-    - name: Remove loop devices on Solaris and BSD
-      ansible.builtin.shell: "{{ ephemeral_remove_loop_dev_cmd }}"
-      when: ephemeral_remove_loop_dev_cmd is defined
-
-    - name: Remove the test FS
-      file:
-        path: '{{ item }}'
-        state: absent
-      loop:
-        - /tmp/myfs_A.img
-        - /tmp/myfs_B.img
-        - /tmp/myfs
-  when: ansible_system in ('Linux', 'SunOS', 'FreeBSD', 'NetBSD', 'OpenBSD')

tests/integration/targets/sysctl/tasks/main.yml

@@ -170,7 +170,7 @@
 
     - name: Try sysctl with no name
       sysctl:
-        name: ""
+        name:
         value: 1
         sysctl_set: yes
       ignore_errors: True
@@ -180,7 +180,7 @@
       assert:
         that:
           - sysctl_no_name is failed
-          - "sysctl_no_name.msg == 'name cannot be blank'"
+          - "sysctl_no_name.msg == 'name cannot be None'"
 
     - name: Try sysctl with no value
       sysctl:

tests/sanity/ignore-2.15.txt

@@ -1,8 +0,0 @@
-plugins/modules/synchronize.py pylint:disallowed-name
-plugins/modules/synchronize.py use-argspec-type-path
-plugins/modules/synchronize.py validate-modules:doc-default-does-not-match-spec
-plugins/modules/synchronize.py validate-modules:nonexistent-parameter-documented
-plugins/modules/synchronize.py validate-modules:parameter-type-not-in-doc
-plugins/modules/synchronize.py validate-modules:undocumented-parameter
-tests/utils/shippable/check_matrix.py replace-urlopen
-tests/utils/shippable/timing.py shebang

tests/sanity/ignore-2.16.txt

@@ -1,5 +0,0 @@
-plugins/modules/synchronize.py use-argspec-type-path
-plugins/modules/synchronize.py validate-modules:doc-default-does-not-match-spec
-plugins/modules/synchronize.py validate-modules:nonexistent-parameter-documented
-plugins/modules/synchronize.py validate-modules:parameter-type-not-in-doc
-plugins/modules/synchronize.py validate-modules:undocumented-parameter

tests/unit/compat/builtins.py

@@ -31,4 +31,3 @@ except ImportError:
     BUILTINS = 'builtins'
 else:
     BUILTINS = '__builtin__'
-    __all__ = ['__builtin__']

tests/unit/plugins/action/test_synchronize.py

@@ -19,6 +19,7 @@ import os
 import unittest
 import yaml
 
+import ansible.plugins
 from ansible_collections.ansible.posix.tests.unit.compat.mock import patch, MagicMock
 from ansible_collections.ansible.posix.plugins.action.synchronize import ActionModule
 

tests/utils/shippable/shippable.sh

@@ -145,9 +145,9 @@ function cleanup
         fi
 
         if [ "${process_coverage}" ]; then
-            # use python 3.9 for coverage to avoid running out of memory during coverage xml processing
+            # use python 3.7 for coverage to avoid running out of memory during coverage xml processing
             # only use it for coverage to avoid the additional overhead of setting up a virtual environment for a potential no-op job
-            virtualenv --python /usr/bin/python3.9 ~/ansible-venv
+            virtualenv --python /usr/bin/python3.7 ~/ansible-venv
             set +ux
             . ~/ansible-venv/bin/activate
             set -ux